Product category:
I/O devices
News Release from: Accutest | Subject: FlightRecorder - FR1000 vehicle datalogger
Edited by the Laboratorytalk Editorial
Team on 21 February 2001
Vehicle datalogger uses flash cards and
GSM
Accutest introduces the FlightRecorder - FR1000, a new tool to help vehicle development engineers record and manage data for evaluation, statistical analysis and troubleshooting.
Accutest introduces the FlightRecorder - FR1000, a new tool to help vehicle development engineers record and manage data for evaluation, statistical analysis and troubleshooting In the development phase of a new vehicle, engineers would like to access the data relevant to particular events, but need to filter it to their particular requirements, in order to avoid being swamped
This article was originally published on Laboratorytalk on 11 Jul 2001 at 8.00am (UK)
Related stories
Chromatographic acquisition software
24-bit acquisition system interfaces to computer via USB, meaning that no board needs to be installed, and is compatible with leading software packages
Get encoder data into your PC
New cards from ComputerBoards allow encoder signals such as displacement data to be ported into PC applications without the need for add-on hardware - encoder support is built into the boards.
With CAN based systems, the large amount of data makes the problem especially difficult.
With the introduction of the FR1000, there is now an answer.
Consisting of a small, rugged, aluminium 'black box' measuring 160 x 134 x 44 mm that can be mounted in the engine compartment, the cab or under the vehicle, the FlightRecorder can record multiple events on non- volatile flash cards.
Further reading
New guide to Computerboards range
The world's most comprehensive collection of PCI-bus compatible data acquisition boards, from leading developer ComputerBoards Inc, is listed in a new product guide from Adept Scientific.
Smarter temperature measurement
Highly accurate temperature measurement is made much easier with the release of a powerful new thermocouple input board for PCs.
The unit operates on 8 to 30 V DC and so is suitable for cars, trucks, buses, agricultural and construction equipment and a host of other everyday and military vehicles.
Power consumption is only 300 mA in normal operation and a mere 10 mA in sleep mode.
It will operate reliably in all conditions between -30 and +70C.
Flash cards are available from 8 to 300 Mb to store up to 15 Million messages and there is error frame detection and recording, plus time stamping to a resolution of 10usecs.
The unit is configurable for multi-trigger start/stop recording, continuous recording with a circular buffer, manual or event triggered start/stop, and single shot or repetitive recording with configurable pre and post trigger buffers - each on 2 separate CAN channels.
Normal configuration is via a PC running Windows 95, 98 or NT4, but there is also a keypad option to allow monitoring or re-configuration on the move.
Triggered events are signalled to the PC or via an SMS message on the GSM mobile phone network.
Collected data can be downloaded directly to the PC, via the flash card or via the GSM mobile phone network.
It is also possible to re-configure the FlightRecorder remotely anywhere in the world via the GSM link.
Development tools such as the Accutest CANalyzer can use the collected data, in order to obtain an off-line replay of the messages on the CAN network(s).
As well as linking with a CAN bus, the FR1000 has four analogue and eight digital I/O channels, allowing direct connection to sensors and actuators.
Coming soon, will be a Basenode unit to allow multiple analogue and digital channels to be connected to a third independent CAN network on the FR1000 and a connection to the diagnostic network for real time diagnostics via GSM.
The collection and evaluation of accurate event data has long been a nightmare for development engineers.
Now, with the FR1000 they have an affordable and efficient tool to make it cost-effective and simple.
• Accutest: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page

