Product category:
Sampling equipment
News Release from: Aerocom (UK) | Subject: AC3000
Edited by the Laboratorytalk Editorial
Team on 23 September 2002
Pneumatic transfer for QC sampling
Multi station system carries samples from manufacturing line to quality control laboratory
Aerocom Systems has developed what it says is the premier system for the transfer of sampling at a manufacturing facility This system has been developed with a mindset that continuous sampling is required to ensure quality and consistency of product
This article was originally published on Laboratorytalk on 10 Jan 2003 at 8.00am (UK)
Related stories
Aqueous solution conductivity determined precisely
The new Model 3084 from Amber Science is a bench top, line powered, micro-processor based conductivity instrument designed to precisely determine the conductivity of aqueous solutions.
The AC3000 is a multi station system that can safely move a sample at 6m per second and greater.
The stations are designed so that the user is not required to dial a destination address, but merely place the sample in a carrier and input the carrier into the system.
The carrier is immediately queued into the system and is sent directly to the laboratory where personnel can test the samples.
Empty carriers are easily dispensed of by merely placing the carrier into the system.
The system keeps track of each stations carrier inventory and distributes the carriers to the station in most need.
This system is ideal for any manufacturing facility where quality control is essential.
The ease of use of the system allows for continuous sampling while keeping manufacturing and laboratory personnel free to do their job rather than collect samples.
This system has been thoroughly tested and is available immediately.
• Aerocom (UK): contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
