Categories
- Analytical instruments (7,904)
- Life sciences and clinical laboratory equipment (3,194)
- Computer hardware (787)
- Industry news (16)
- Laboratory equipment and wares (5,360)
- Laboratory supplies and consumables (1,136)
- Pumps, Valves, Filters (681)
- Services (2,689)
- Computer software (2,705)
Automation Components
2305 Evergreen Road
Middleton
WI 53562
USA
Latest articles from this company
News releases from this company
Monitoring temperature and RH in the lab
Automation Components introduces two new sensor displays for monitoring temperature and relative humidity for laboratory and cleanroom applications
News from Laboratorytalk, 4 March 2005
Precision grade sensors are Nist traceable
Each PG temperature or humidity sensor will include a five point calibration certificate against an Nist traceable standard
News from Laboratorytalk, 13 January 2004
Ultra-cold temperature sensor is submersible
Designed for cryogenic or refrigeration applications to -200C and ideal for monitoring applications involving chemical plant, laboratories, freezers, etc
News from Laboratorytalk, 7 July 2003
Combination temperature/humidity sensor
Designed for use in washdown or wipedown areas, this combination sensor should be ideal for HVAC or monitoring applications involving clean rooms, laboratories, vivariums, and operating rooms
News from Laboratorytalk, 7 May 2003
Economic enthalpy transmitter
Converts a resistive type humidity sensor into a linear two-wire, 4 to 40mA output signal
News from Laboratorytalk, 2 April 2003
1% relative humidity transmitters
Resistive-based humidity and temperature sensors use advanced ceramic technology to enable them sensors to recover fully from condensation
News from Laboratorytalk, 19 February 2003
Not what you're looking for? Search the site.
Featured articles
-
Metrohm determines sodium bicarb concentration
Using a 809 Titrando in conjunction with the 800 Dosino dosing system the titration of sodium bicarbonate can be carried out fully in accordance to the pharmaceutical standard CFR 21 Part 11.
-
Water content determined by Karl Fischer method
Metrohm has developed a method to determine the moisture content of gases based on the ISO standard 10101.
