Product category:
Laboratory furniture and storage
News Release from: TTi (Thurlby Thandar Instruments) | Subject: EX4210R
Edited by the Laboratorytalk Editorial
Team on 29 July 2002
Lab power supply really motors
High-current single-output bench power supply can be used as a test source for the new generation of automotive electrical parts, which will use 42V (18-cell) instead of 14V (6-cell) batteries
The EX4210R, new from TTi (Thurlby Thandar Instruments), is a high-current single-output bench power supply capable of currents up to 10A at voltages up to 42V The choice of 42V enables the unit to be used as a test source for the new generation of automotive electrical parts which will use 42V (18-cell batteries) instead of 14V (6-cell batteries) to reduce currents and hence wiring losses
This article was originally published on Laboratorytalk on 4 Jun 2001 at 8.00am (UK)
Related stories
Simplified data handling for RS232/GPIB hardware
The new DDDA data acquisition software from Stanford Research Systems simplifies the control and plotting of data from all RS232 and GPIB instruments using Windows 95/98 and NT.
Harmonics analyser measures flicker
The HA 1600 from TTi is upgraded to incorporate both Amendment 14 to the harmonics legislation standard (EN61000-3-2), and extra flicker measurement capabilities to EN61000-3-3
The 420W output power capability is achieved despite the highly compact case style, which has dimensions of only 140 x 160 x 195 mm.
Weight is just 3.6kg.
To match its high current capability, the power supply incorporates remote sense terminals, which can eliminate the effects of connection lead resistance.
Sensing can be selected as remote or local by a front-panel switch.
The EX4210R uses mixed-mode regulation technology which combines switch-mode pre-regulation with linear post-regulation.
Special techniques are used to maintain very high efficiency while achieving noise levels that are close to that of a pure linear regulator.
Line and load regulation are both better than 0.01% and output noise is less than 2mV, even at full power.
High-resolution controls allow accurate setting of voltage and current levels.
The EX4210R incorporates separate 4-digit voltage and current meters giving a resolution of 10mV and 10mA.
The meters use bright 14mm LED displays, and have an update rate of four per second to provide near-instantaneous response.
The unit has been designed to meet the stringent requirements of relevant IEC standards for safety and EMC.
The output is intrinsically short-circuit proof, and is protected against external voltages and reverse currents.
Low heat output ensures that no part of the PSU suffers excessive temperature rise.
The EX4210R costs £395 (plus VAT) in the UK, and is available from both TTi and its distributors.
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
