Product category:
General lab equipment
News Release from: TTi (Thurlby Thandar Instruments) | Subject: EX752M
Edited by the Laboratorytalk Editorial
Team on 14 November 2003
Bench power supply can supply 150V and
4A
The new unit is a multi-mode 300W PSU that can operate as a dual supply with two independent and isolated outputs, or as a single supply of double the power
The EX752M, new from TTi, is a laboratory bench power supply offering both high-voltage and high-current capabilities The new unit is a multi-mode 300W PSU that can operate as a dual supply with two independent and isolated outputs, or as a single supply of double the power
This article was originally published on Laboratorytalk on 4 Jun 2001 at 8.00am (UK)
Related stories
Simplified data handling for RS232/GPIB hardware
The new DDDA data acquisition software from Stanford Research Systems simplifies the control and plotting of data from all RS232 and GPIB instruments using Windows 95/98 and NT.
Harmonics analyser measures flicker
The HA 1600 from TTi is upgraded to incorporate both Amendment 14 to the harmonics legislation standard (EN61000-3-2), and extra flicker measurement capabilities to EN61000-3-3
As a dual unit, each output provides 0-75V at 0-2A.
As a single unit, the output can be selected as either 0-75V at 0-4A or 0-150V at 0-2A.
In single modes, the unused half of the unit becomes completely inoperative, and its displays are blanked.
Because of the higher voltages it can produce, the EX752M uses special safety binding posts which can accept spade terminals, 4mm plugs, or bare-end wires without exposing any metal parts.
To achieve a product compact and light enough to be suitable as a general-purpose laboratory PSU, the EX752M uses mixed-mode regulation technology which combines switch-mode pre-regulation with linear post-regulation.
Special techniques are used to maintain very high efficiency whilst achieving output noise levels that are close to that of a pure linear regulator.
This is achieved in a casing measuring only 260x160x320mm and weighing only 4.4kg.
Operation can be constant voltage or constant current with automatic crossover.
Individual DC output switches are fitted.
When the output switch is set to off, the current limit setting is displayed, enabling conditions to be set before the load is connected.
Line and load regulation are both better than 0.01%, and output noise is less than 2mV even at full power.
High-resolution controls allow accurate setting of voltage and current levels.
The EX752M incorporates separate digital voltage and current meters on each output.
The meters use bright 14mm (0.56-inch) LED displays, and have an update rate of 4s-1, providing near instantaneous response.
The unit incorporates full power-factor correction to minimise supply current harmonics.
The outputs are intrinsically short-circuit proof, and are protected against external voltages and reverse currents.
High power efficiency ensures that the unit remains cool without the need for a fan, thus giving silent operation.
The EX752M costs £449 (plus VAT) in the UK.
• TTi (Thurlby Thandar Instruments): contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
