Product category:
Microscope supplies and accessories
News Release from: Carl Zeiss | Subject: Clonis
Edited by the Laboratorytalk Editorial
Team on 28 March 2003
Pushing the boundaries in laser
microdissection
Laser workstation addresses the limitations of existing microdissection systems in maintaining sterility and in restrictions on sample thickness
Laser microdissection systems that enable users to isolate cells and small areas of tissue have become routine over the last five years However, their open architecture makes it difficult to maintain sterility, most are limited to a sample thickness of between 20µm and 40µm and all are affected by moisture, limiting their use for the manipulation of live cells and tissue
This article was originally published on Laboratorytalk on 26 Jul 2001 at 8.00am (UK)
Related stories
Inverted microscope and cell observer
Carl Zeiss says it has sets new standards in microscopy and digital imaging with the introduction of its Axiovert 200 inverted microscope
Student microscope with ICS optics
New accessories for the Carl Zeiss Axiostar instrument, offering brightfield, darkfield, and phase 1, 2, and 3 operations, and an 'attractive' price
The Clonis laser workstation addresses each of these limitations and is unique in its ability to maintain a sterile environment while successfully processing viable tissue sections of up to 200µm and isolating living cells within culture media.
Equally capable of cutting fixed tissue slices, its combination of features brings distinct advantages to many application areas such as cell biology, neurobiology, pathology, proteomics and genomics research.
The key to the technological leadership of the Clonis system is a support membrane that contains an IR absorbing layer.
Cells or tissue sections are either grown or placed on the membrane and an infra-red (IR) laser beam focused onto the IR absorbing layer of the support.
This causes a localised cut in the membrane and any cells or tissue mounted on it.
Because Clonis does not interact with the sample directly it is unaffected by the moisture content of the specimen.
Importantly, all processing may be performed within a sterile petri dish, significantly reducing the risk of contamination.
• Carl Zeiss: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
