Product category:
Dataloggers
News Release from: Celsum Technologies | Subject: PR100A
Edited by the Laboratorytalk Editorial
Team on 24 June 2003
Panel-mounting expandable data logger
and printer
The unit is mains powered, accepts inputs from type K and type J thermocouples, PTC and NTC sensors, PT100 platinum resistance sensors, and a 4-20mA current loop signal
Celsum Technologies supplies the PR100A panel-mounting, programmable twin-channel datalogger and printer module, together with the DR100A four-channel expansion module, allowing a total of six channels of data to be monitored The unit is mains powered (90 to 240VAC), accepts inputs from type K and type J thermocouples, PTC and NTC sensors, PT100 platinum resistance sensors, and a 4-20mA current loop signal
This article was originally published on Laboratorytalk on 2 Jun 2008 at 8.00am (UK)
Related stories
Humidity generator controls sample environment
The HGC Humidity Generator and Controller can control the humidity of a chamber of up to nominally 2000ml volume to a relative humidity of 85% at temperatures between 5C and 85C
This compact, reliable and cost-effective instrument may be programmed to produce on-line reports, daily reports, and historical reports.
It has an LCD display and a built-in printer with eight dots per millimetre resolution, takes a standard paper roll up to 58mm width, and is mounted in a Din-standard 96x96 mm panel-mounting housing.
The DR100A expansion module may be surface or Din-rail mounted, and is linked to the PR100A via an integral RS485 connection.
The units are overload protected and carry a 12 months manufacturer's warranty. Request a free brochure from Celsum Technologies ...
• Celsum Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
