Product category:
Viscometers and rheometers
News Release from: Celsum Technologies | Subject: Controlled Two-Point Tester (CTPT)
Edited by the Laboratorytalk Editorial
Team on 24 March 2005
Hard data on fresh mortar and concrete
Instrument takes a sample of fresh concrete or cement and stirs it over a controlled range of speeds, measuring as the speed changes the torque needed to maintain stirring at that speed
A rugged instrument for testing the flow properties or rheology of fresh cement and concrete is offered by Celsum Technologies The instrument, the Controlled Two-Point Tester (CTPT), takes a sample of the fresh concrete or cement in a bucket-like container and stirs it with an agitator over a controlled range of speeds, measuring as the speed changes the torque needed to maintain stirring at that speed
This article was originally published on Laboratorytalk on 2 Jun 2008 at 8.00am (UK)
Related stories
Humidity generator controls sample environment
The HGC Humidity Generator and Controller can control the humidity of a chamber of up to nominally 2000ml volume to a relative humidity of 85% at temperatures between 5C and 85C
Mine safety boosted by vane test for fresh cement
The CTPVT, developed by Celsum Technologies, carries out the vane test to allow the yield or slump characteristics of the materials to be accurately determined
A computer then processes the data, plots the speed-torque graph and calculates both the slope of the resulting line and the intercept.
The two points, the slope of the graph, and the intercept, give the two characteristic parameters for the material's flow behaviour since, broadly, fresh cement and concretes behave as Bingham Fluids.
These only start to flow (during useful experimental timescales) after a certain yield stress has been overcome, and flow in a linear or Newtonian manner after this; indeed, the slope of the graph is a measure of the specimen's viscosity.
Further reading
USB data logger is high speed and high resolution
The CDL01-USB can supply the excitation current for sensors such as strain gauges, load cells and pressure transducers up to 300mA from a USB port, or up to 600mA using an auxiliary power supply.
Accelerometer uses cutting-edge technology
With ranges available from +/-2g to +/-225g, and with single and twin axis options, the CTA001 has many applications in industry, research and development
Experimental work has shown that these two parameters are good indicators of the water content and of the composition ratio of the mix, providing a valuable quality control test both on-site and in development and teaching departments.
Roy Carter, Celsum's managing director, said: "The CTPT is a complementary technique to the conventional slump test.
"CTPT gives more scientific engineering information, and the data can give allow quality problems and batch-to-batch changes to be readily identified".
The CTPT is supplied with a helical impeller which mounts centrally in the sample, and with a plantary gear and two H-impellers for materials with a tendency to cavitate.
The machine is electrically driven and is fitted with double-interlocked safety guards and a control panel sealed to IP65 standards.
The impeller speed may be controlled over the range 5-120rpm, and torques up to 30Nm measured and logged on the computer system.
The CTPT computer-controlled two-point workability tester also has applications in testing materials other than fresh cement and concrete, especially non-homogeneous fluids which cannot be tested with normal laboratory instruments.
The CTPT complements Celsum Technologies's other materials testing instruments.
which include the Eta 2100 and BFR 2100 capillary extrusion rheometer, the MXR2 extensional rheometer, the T2SR time and temperature scanning rheometer, Cest combined extrudare swell and temperature, and also complements Celsum's range of process control instrumentation. Request a free brochure from Celsum Technologies ...
• Celsum Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page

