Product category:
Mechanical testing equipment
News Release from: Celsum Technologies | Subject: CTPT Concrete Two Point Tester
Edited by the Laboratorytalk Editorial
Team on 29 May 2006
Concrete two point tester has integral
strain card
Integral DSC digital strain conditioning amplifier card provides high speed, high accuracy, direct feed of pressure to the computer system controlling the machine and logging and displaying the data
The DSC is a small, robust printed circuit board, designed and built using the latest surface mount technology, that will provide the excitation voltage for a strain gauge transducer, conditions the signal, and transmits it directly to the serial port of a computer via an RS485, RS232 or Can interface The RS485 and Can protocols allow a network of multiple transducers to be addressed from one serial port
This article was originally published on Laboratorytalk on 2 Jun 2008 at 8.00am (UK)
Related stories
Humidity generator controls sample environment
The HGC Humidity Generator and Controller can control the humidity of a chamber of up to nominally 2000ml volume to a relative humidity of 85% at temperatures between 5C and 85C
Mine safety boosted by vane test for fresh cement
The CTPVT, developed by Celsum Technologies, carries out the vane test to allow the yield or slump characteristics of the materials to be accurately determined
The fully-programmable DSC can operate at baud rates up to 230,400, data rates to 500 readings per second, data resolutions up to one part in 400,000 (or 2.5ppm), has built-in shunt calibration, linearisation tables, provision for a temperature probe, a digital input and digital output, and may be programmed to output in engineering units.
The CTPT is a testing instrument for determining the flow properties of fresh cement and concrete mixes, and is capable of giving meaningful engineering data about the mix.
The machine stirs the mix at a range of speeds, and the pressure in a hydraulic gearbox is recorded as a function of speed.
Further reading
USB data logger is high speed and high resolution
The CDL01-USB can supply the excitation current for sensors such as strain gauges, load cells and pressure transducers up to 300mA from a USB port, or up to 600mA using an auxiliary power supply.
Accelerometer uses cutting-edge technology
With ranges available from +/-2g to +/-225g, and with single and twin axis options, the CTA001 has many applications in industry, research and development
This pressure reading is related to the torque applied to the stirrer, and a plot of torque against speed generally shows a straight-line relationship that does not pass through the origin but, rather, intercepts the pressure axis at a positive value when the speed is zero.
This intercept value is a measure of the yield stress, ie the stress which must be exceeded before the mixture will flow.
The slope of the subsequent straight line is a measure of the viscosity or plasticity of the batch.
The new version of the CTPT is provided with both manual and computer control, with a purpose-written software package controlling the speed at a constant value, over a 'staircase' of a series of constant speeds each held for a selected period of time, or over a ramp, with speed changing linearly over a set period of time.
Full guarding is provided, together with a torque overload circuit, and a planetary gear attachment allows an impeller with a non-static axis to be used.
Said Celsum Technologies's MD, Roy Carter: "We chose the DSC as an easy-to-use way of converting the pressure signal from a strain-gauge transducer into a digital signal that could be read by the computer".
"It was much cheaper than buying an A/D converter card with an equivalent resolution".
"We mounted the DSC in a DSJ1 junction box, which is designed to protect the DSC to IP65 standard and to make wiring of the circuitry easy".
"We found it a simple matter to write a driver routine for the DSC into our Visual Basic software code, and extensive tests showed that the circuit was extremely reliable".
"We were very impressed with the fast speed of reading, and the on-board shunt calibration resistor, which allowed us to write a routine to automatically calibrate the sensor." Both the CTPT and the DSC are available from Celsum Technologies. Request a free brochure from Celsum Technologies ...
• Celsum Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
