Product category:
Microscope supplies and accessories
News Release from: Coherent | Subject: Avia 355-7
Edited by the Laboratorytalk Editorial
Team on 09 November 2007
UV laser suits drilling and
micromachining
The combination of high pulse energy and high repetition rate make the Avia 355-7 an ideal laser for a variety of micromachining applications in the microelectronics industry.
The Avia 355-7 from Coherent is a Q-switched, frequency-tripled, solid-state laser delivering over 7Watts of average power at 355nm, in a package designed to maximise reliability for a minimum cost of ownership The highest average power is achieved at repetition rates near 60kHz, but the laser can be operated at pulse rates as high as 100kHz, enabling very high throughput micromachining processes
This article was originally published on Laboratorytalk on 28 Feb 2003 at 8.00am (UK)
Related stories
Roses are red, lasers are violet
Violet laser producing power from 4mW to 30mW at 408nm for series a range of applications including cytometry, high-throughput screening, and confocal microscopy
Forensics in the field or lab
Portable forensic laser system provides trace evidence detection at a crime scene or in the laboratory
Pulse width is less than 30ns to minimise peripheral thermal effects in these applications.
The Avia 355-7 also delivers superior beam quality and high pulse-to-pulse stability.
Both OEMs and end-users will benefit from the high product reliability and two-year warranty of this fully RoHS-compliant laser.
This new model has evolved from earlier Avia ultraviolet lasers, which have an installed base of several hundred units in the microelectronics industry alone.
Numerous innovative features ensure that the Avia 355-7 delivers superior performance and reliability, especially when compared to competitive products.
These new features include an automated crystal shifter, which results in uniform power output over the life of the laser, and an improved THG crystal life of 60,000 hours.
The Avia 355-7 also includes several automated stabilisation mechanisms (first-pulse suppression, ThermEQ, PulseEQ, and PulseTrack) to ensure total control of the pulse energy, ie, power on demand.
In addition, the laser's unique Posilock beam position sensor and feedback loop results in very high beam-pointing stability over the life of the laser.
These include via-hole drilling, chip singulation, scribing and dicing of silicon and low-K materials, and solar cell micromachining.
The characteristics of the Avia 355-7 are also well-suited to the drilling, cutting, and scribing of ceramics.
• Coherent: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
