Product category:
Chemical analysis equipment
News Release from: Digital Data Systems | Subject: Bomb calorimeter
Edited by the Laboratorytalk Editorial
Team on 05 July 2007
Calorific analysis of fuels and oils
Calorific value (CV) of liquid fuels and oils can be determined in exactly the same way as solids, like coal, by placing the sample in a pressurised vessel, igniting, and measuring the released heat
The sample is placed in the crucible; the firing cotton is then placed in contact with the sample and the vessel pressurised with oxygen The firing cotton is then ignited which in turn ignites the sample
This article was originally published on Laboratorytalk on 13 Sep 2005 at 8.00am (UK)
Related stories
Calorimeter doesn't cost a bomb
Inexpensive bomb calorimeter is suitable for low-volume calorimetry applications such as food production and quality control, fossil fuels, animal feed research, propellants, and scientific research
The burning of the sample causes the vessel temperature to increase, this increase in temperature is very accurately measured and this is proportional to the calorific value of the sample.
This is the method generally used for fuel oils.
If the oil is viscous, an eyedropper or syringe can be used to place the oil into the crucible.
If the oil is not viscous, a spatula should be used ensuring that all the sample is inside the crucible and not on the outside.
Most fuel oils do not splatter on combustion so this method is generally acceptable, however if the oil does splatter then a cellophane cover must be placed over the crucible or the sample should be placed in a gelatin capsule.
The cover or capsule must be weighed and used as a spike value.
Inspecting the sidewall of the vessel for residue after firing can identify splattering.
• Digital Data Systems: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
