Product category:
Mechanical testing equipment
News Release from: Environmental Equipments | Subject: ShockTracker
Edited by the Laboratorytalk Editorial
Team on 27 April 2007
Track shocks in transit with
ShockTracker
Small, low cost device that can be attached to virtually any item likely to be dropped, banged or crashed, from a small package to a pallet or, even, a vehicle, to record the when and how much
A bump, a drop, a bang or a crash might not leave a mark but it will leave damage, no matter how small, that might later prove to be dangerous or costly, maybe both This raises three questions; what, when and how much? Knowing when and how much can usually allow the 'what' to be identified and provide an indication of whether serious damage might have resulted
This article was originally published on Laboratorytalk on 23 Nov 2006 at 8.00am (UK)
Related stories
Vibration transducer is more rugged than most
Model 1074 industrial vibration transducers from Environmental Equipments are designed specifically for use in harsh, heavy applications where lightweight accelerometers have only a limited life
Triaxial accelerometer has built-in amplifier
The latest triaxial accelerometer from Environmental Equipments has been designed for use in harsh conditions in industrial, automotive and aviation applications
ShockTracker will record shocks up to 100g against time on the internal Eprom memory and give a visual indication that a preset shock level has been exceeded.
The stored data can be downloaded to a PC via the RS232 port using the ShockTracker Management software, which is also used to set-up the unit and analyse and display the downloaded data in text and graphical formats.
During set-up, the time frame can be set from one second to 4.5hours, in increments of one second, with the maximum shock during each of 15,800 frames being recorded.
This gives a recording time of between two hours and one year with a start time that may be delayed for up to 45 days.
Three models are available with ranges of 5g, 50g and 100g all with a maximum shock load of 300g.
With a clear timeline showing when a shock or shocks occurred, the 'guilty' party might be identified and the potential damage estimated.
The ShockTracker will not prevent the bumps, drops, bangs and crashes but it will show how much and when.
Simply knowing that a record is being made will probably make everyone a little more careful.
• Environmental Equipments: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
