Product category:
Heating: ovens, furnaces, autoclaves
News Release from: Elite Thermal Systems | Subject: Raddec furnace
Edited by the Laboratorytalk Editorial
Team on 22 July 2005
Assess tritium and C14 content of
nuclear waste
Multi-tube furnace is central component in advanced system to extract and measurement radioactive elements such as tritium and carbon-14 for environmental and nuclear decommissioning projects
Elite Thermal Systems has formed an alliance with Raddec, a scientific company specialising in the extraction and measurement of radioactive elements such as tritium and carbon-14 for environmental and nuclear decommissioning projects Carbon-14 and tritium are produced naturally in the environment via cosmic ray bombardment in the upper atmosphere
This article was originally published on Laboratorytalk on 25 Oct 2004 at 8.00am (UK)
Related stories
Tube furnace stands up to the test
When Hydro Polymers decided to install equipment to allow it to determine that products meet BS 6425 and CEI ICE 754-2, it appointed Elite Thermal Systems to design the system
Specialist system for annealing indium wafers
Elite Thermal Systems has designed and manufactured a system for annealing indium wafers under clean room conditions for use in opto-electronics
They are also produced, more significantly, as by-products of nuclear power generation.
The need to decommission ageing reactors and reactor buildings requires proper characterisation of diverse materials (eg metal, concrete, biota, soil, sediment, plastic, asbestos, and graphite) prior to any waste sentencing.
A number of different analytical techniques have been developed for the analysis of tritium and carbon-14 in the various materials.
Further reading
Aqueous solution conductivity determined precisely
The new Model 3084 from Amber Science is a bench top, line powered, micro-processor based conductivity instrument designed to precisely determine the conductivity of aqueous solutions.
384 rack code reader
Created to meet the growing need in biotechnology and pharmaceutical R and D communities for individual identification of ever smaller quantities of fluid or dry samples
Latest pharma code is no problem for this reader
Hand-held multi-symbology code reader is able to cope with reduced space symbology coding being increasingly applied to pharmaceutical packaging
These include wet oxidation, which employs sulphuric acid, and persulphate oxidation systems for organically bound carbon-14, although most systems have limitations and drawbacks.
Raddec's equipment is state-of-the-art and overcomes many of the previous limitations.
The company set out to design a novel and integrated system that would have a long life, provide a high sample throughput and which would satisfy the demands of nuclear and environmental regulators, research and industry.
Designed by scientists from the University of Southampton who specialise in environmental radioactivity and radiochemistry, the Raddec system represents a step forward in the nuclear power industry's abilities to accurately measure particular radionuclides.
At the core of the testing equipment is the Elite furnace.
Specially designed by Raddec's scientists and built by Elite's engineers, the furnace comes as a multi-tube system with integral controlled heating, metered air and oxygen flow, a catalytic zone and a bubbler chain to quantitatively trap the oxidised products.
Four or six samples can be extracted at one time over a period as short as three hours.
Samples up to 10g are placed in a silica boat and are transferred to their own silica-glass work-tube.
Each of the work-tubes operate as a flow-through system where carrier gases of air and oxygen-enriched air move the volatile decomposition products from the sample zone through two other in-line, independently controlled furnace zones.
The temperature of the sample-zone is ramped up to 500C, or higher if needed, at an appropriate rate dependent on the sample type.
The combustion products pass over a catalyst, held at 800C, to ensure the complete oxidation of compounds containing tritium and carbon-14.
The products are trapped in liquid bubblers and are measured using a liquid scintillation counter.
Raddec's specialised instruments are proving popular.
NNC (Niras) that serves the nuclear industry has purchased five systems.
Commenting on the Raddec system, Frank Pratley, laboratory manager at NNC-Niras, said: "The Raddec furnaces are just what we need to efficiently assess the tritium content of waste and materials associated with nuclear decommissioning.
"The instruments are very well designed, function superbly, and form an important part of our analytical armoury".
Alf Roberts, managing director of Elite, said: "At Elite the emphasis is on designing and producing leading edge quality products with excellent service delivery.
"We achieve our competitive advantage through collaboration with other leading edge companies and the collective experience of our design engineers who continually innovate new products".
Elite boasts a range of chamber, tube and custom built ovens and furnaces.
The advanced material technology together with innovative design enables temperatures up to 2000C to be reached.
With sophisticated software and data-logging capabilities, the ovens and furnaces can be supplied with multiple heating zones incorporating closed loop PID control.
• Elite Thermal Systems: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
