Product category:
Evaporation equipment
News Release from: Eurotech | Subject: Dyna Vap
Edited by the Laboratorytalk Editorial
Team on 11 November 2004
Centrifugal evaporator for drying
nucleic acids
Designed for rapid and efficient drying of DNA, RNA, methanol/water mixtures and buffer solutions, and requiring no additional equipment or external connections
EuroTech announces the launch of the Dyna Vap centrifugal evaporator The high capacity rotor supplied with the Dyna Vap accepts 24x1.5/2.0ml and 48x0.5ml tubes simultaneously
This article was originally published on Laboratorytalk on 16 Jul 2004 at 8.00am (UK)
Related stories
Dry block heater for microtubes and PCR plates
Microprocessor control regulates high wattage heaters in these digital dry baths to provide precise, accurate control
The evaporation chamber is seamless drawn from a single piece of molybdenum alloyed stainless steel providing excellent corrosion resistance.
The rotor can be easily cleaned and the internal mechanics are protected from the moisture and volatile organics released during evaporation.
The built-in pump requires no oil and is virtually maintenance free, says EuroTech.
The solid Teflon pump head resists cracking, peeling and corrosion.
A convenient vacuum gauge is located on the front panel.
Upon turning off the pump, a bleeder valve automatically releases the vacuum and allows air to enter the chamber slowly, so as not to disturb the samples.
The system is integrated with centrifuge, pump and vacuum regulator, occupying minimal bench space.
Maximum speed/RCF 1800rpm/1400g, temperature range 30-60C, temperature setting is continuously variable, drive is magnetically coupled motor/rotor.
Pump is oil-free, pump capacity 28l/min, lowest vacuum 5mbar.
• Eurotech: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
