Product category:
Viscometers and rheometers
News Release from: Freeman Technology | Subject: FT3
Edited by the Laboratorytalk Editorial
Team on 23 January 2003
Pharmacia optimises granulation process
Researchers use powder flow rheometer to accurately predict the end-point of a granulation step, resulting in an optimised final dosage form
Researchers at pharmaceutical giant Pharmacia have used a powder flow rheometer from Freeman Technology to accurately predict the end-point of a granulation step, resulting in an optimised final dosage form To make tablets, a granulation liquid (in this case, water) is added to a dry powder mix of active ingredients and excipients
This article was originally published on Laboratorytalk on 7 Jul 2004 at 8.00am (UK)
Related stories
Matching material with machine
Investment in powder rheometer for drug development programmes will help gather flowability data on increasingly-complex large molecule drug candidates
Fully automated powder testing
New range of accessories for powder rheometer, which streamline powder assessment, will be launched in November 2004 at the AAPS meeting in Baltimore
This wet mass is then dried, milled and lubricated before being tabletted at a range of compression forces.
The end-point of the granulation process is the point at which the correct amount of liquid has been added and the mass blended for an appropriate time in order to achieve the optimum rheological properties - being able to accurately predict the granulation end-point is crucial to final product quality.
Orla Cassidy and Iwan Thomas at Pharmacia's Northumberland site used the FT3 powder rheometer to assess the rheological properties of a commercial formulation with haloperidol as an active ingredient1.
Further reading
Fully automated powder flow testing
Automated aeration accessory allows the flow properties of powders to be measured at different levels of aeration to determine how flowability depends on the amount of entrained air
Shear cell measurements have been validated
Work performed by an independent laboratory using BCR reference material CRM-116 has confirmed the new shear cell's ability to perform verifiable and highly repeatable shear tests
"We found that the FT3 was very sensitive and was able to discriminate between samples that differ by less than 1% water content by weight," said Dr Cassidy.
"This is important for us because small moisture variations such as this can sometimes have a significant impact on final product quality." For example, energy profiles indicated that at low water content, more energy is required when mixing for shorter times; and as water content increased to 12% by weight, the energy requirement increased with longer mixing times.
"The FT3 appears to be much more sensitive than other instruments.
Being able to quantify the end-point means that an inexperienced operator can easily assess the granulation process," said Cassidy.
"The FT3 has helped us optimise our granulation process and therefore improve our end product." The patented FT3 powder rheometer from Freeman Technology is said to be the only instrument on the market that measures all the relevant forces needed to give a complete and accurate measurement of powder flowability.
Sensitive and reproducible data are obtained by measuring both axial forces (as the blade moves vertically through the sample) and rotational forces (or torque) to determine flow energies.
Dry and wet powders may be evaluated in terms of each of the key variables.
The FT3 works on a patented helical blade principle, where the blade displaces powder as it moves along a helical path through the sample.
Depending on the direction and speed of movement a broad range of flow patterns and rates can be achieved.
The axial and rotational forces acting on the blade are measured and these data form the basis of the flowability assessment.
Force measurements are converted into energy to determine the total energy consumed or work done during the traverse.
• Freeman Technology: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
