Elite Coriolis meters for low flow applications

Emerson Process Management is expanding its Micro Motion Elite Coriolis meter offering for low flow applications.

The Micro Motion meters are compact in design and available in two sizes - 2mm and 4mm nominal diameter, delivering +0.05 per cent liquid flow accuracy, +0.35 per cent gas accuracy, and +0.0005g/cc liquid density accuracy for flow rates of 2 kg/h to 330kg/h.

Low flow rate applications often require measurement devices that can deliver high turndown capability with good measurement performance in real-world conditions.

These applications often require meters that are drainable and have a compact footprint.

The Micro Motion ELITE Coriolis meters have been precisely engineered with these challenges in mind, offering stability and robust performance in a drainable, slim and lightweight package.

The Micro Motion Elite meters are less than 50mm wide to fit in tight spaces and weigh 4kg, eliminating the need for special mounting support.

Full secondary containment is standard.

With 316L stainless-steel wetted parts, the sensor enclosure is available with polished 316L external surface and rounded corners.

The meters are easy to clean and their corrosion resistance properties make them an ideal fit for both hygienic and off-shore applications.

For corrosive and high-pressure applications, the Micro Motion Coriolis meters are also available in nickel alloy construction and are rated to 413 bar (6,000lb/in2).

The advantage of the Micro Motion Elite Coriolis meters comes not just from the sensor design, but electronics that ensure fast and noise-free signal processing to deliver good two-phase flow measurement capability and empty-full-empty batching.

These meters are available with in-situ Micro Motion meter verification technology.

The Micro Motion Elite Coriolis meters are available with four-wire or two-wire electronics, and with a variety of analogue outputs or digital protocols including Foundation fieldbus, Profibus DP and Devicenet.

All Micro Motion Coriolis devices reliably measure mass flow, volume flow, density and temperature from a single device and can measure multiple products without the need for recalibration.

Designed for batching, dosing, filling, blending and a range of process applications, the Micro Motion Elite Coriolis meters are ideal for the chemical, oil and gas, food and beverage, life sciences, pharmaceutical and OEM industries.

To complete the low flow measurement range, the Micro Motion meters are complemented by Micro Motion LF-Series Coriolis meters that deliver precise measurement down to 0.06 kg/h and are ideal for research and pilot plants.

Back to top