Product category:
Evaporation equipment
News Release from: Genevac | Subject: EZ-2
Edited by the Laboratorytalk Editorial
Team on 11 September 2002
Evaporator becomes centrifuge
New operating mode for personal solvent evaporator allows it to function as a low-speed centrifuge, providing accelerations up to 500g
In response to increasing customer demand, Genevac has added a new operating mode to its ground breaking EZ-2 personal solvent evaporator This new function allows the unit to operate as a low-speed centrifuge
This article was originally published on Laboratorytalk on 28 Mar 2008 at 8.00am (UK)
Related stories
Low-speed centrifuge function with this evaporator
Genevac has announced a new operating mode for its EZ-2 centrifugal evaporator, allowing it to additionally function as a low-speed centrifuge
By disengaging the condenser and pump while allowing the powerful direct drive motor to run freely, typical speeds in excess of 2000rpm can be achieved.
With a standard swing-out rotor, this equates to roughly 500g at the sample, enough for many common life science applications.
Genevac's technical director Duncan Guthrie commented "Genevac designed the EZ-2 with flexibility in mind.
We built in an extra run position on our easily set control knob for just such an application.
Customers who currently need to centrifuge samples down before evaporation may now do so in one unit, thanks to the ease of use and multi-tasking nature of the EZ-2 design.
This should save them valuable time and bench space while eliminating a manual handling step in their current procedures".
• Genevac: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
