Product category:
Electron microscopy systems
News Release from: Hitachi High-Technologies | Subject: S-3400N
Edited by the Laboratorytalk Editorial
Team on 12 October 2004
VPSEM promises outstanding performance
Variable pressure scanning electron microscope has new electron optics, detector, pumping system and enhanced sample handling and analysis capabilities
Hitachi High-Technologies has announced the launch of the S-3400N variable pressure scanning electron microscope With new electron optics, detector, pumping system and enhanced sample handling and analysis capabilities, this new instrument allows better quality images to be produced from even the most difficult specimens quickly and more easily, it says
This article was originally published on Laboratorytalk on 8 Feb 2005 at 8.00am (UK)
Related stories
Improved display facilities for VPSEM
The recently-launched S-3400N variable pressure scanning electron microscope from Hitachi High-Technologies has improved display and signal mixing facilities for greater versatility of operation.
Five-segment BSD for variable pressure SEM
High sensitivity allows smaller spot sizes and beam currents to be used in BSD imaging leading to improved resolution and lower risk of beam damage on delicate, uncoated specimens
A major innovation in the S-3400N is the electron optical system which features a new gun bias arrangement and fully automatic beam alignment.
The new quadrant bias system delivers greater beam current, particularly at low accelerating voltages.
This in turn leads to better resolution at low accelerating voltages (10nm at 3kV).
Further reading
New secondary electron detector for S-3400N
Hitachi High-Technologies has introduced a new environmental secondary electron detector (ESED) for the S-3400N variable pressure scanning electron microscope
VPSEM software simplifies 3D analysis
Software provides an easy-to-use alternative for acquiring 3D information compared to methods that either involve manual tilting of the specimen or electronic tilting of the incident electron beam
The auto beam alignment system ensures that the beam is perfectly aligned and even includes automatic aperture alignment.
Perfect alignment gives the sharpest images under all operating conditions.
The S-3400N features a turbomolecular pumping system, which brings a number of benefits.
With no cooling water required, the instrument is both energy efficient and aids the environment by avoiding water wastage.
Equally importantly, the turbomolecular pump produces a cleaner vacuum and brings fast pump-down time and a 90 second specimen exchange, ensuring fast sample throughput.
The variable pressure range is 6-270Pa, allowing oily, wet or non-conducting samples to be imaged.
Improved elemental analysis is capable with the new chamber design, which allows simultaneous mounting of an energy dispersive (EDX) detector and a full wavelength dispersive (WDX) system with an X-ray take-off angle of 35deg at a specimen analysis working distance of 10mm.
The shorter analytical working distance ensures higher resolution imaging at the analysis position.
Enhanced scanning facilities have increased the lowest magnification field of view at the analytical position by 1.5 times compared to previous instruments, making it even easier to locate features of interest.
The S-3400N is available in two sample handling configurations, both accommodating samples up to 200mm diameter.
The Type I instrument has a manual specimen stage and will handle specimen up to 23mm thickness at the analytical working distance, while the Type II instrument features full motorisation of all five axes of the specimen stage with increased sample movements and the ability to accept specimens up to 80mm thickness at the analytical position.
A new semiconductor backscattered electron detector with high sensitivity and fast response rates has been incorporated into the instrument.
This gives exceptional performance at low kV.
The detector also works at fast scan rates, making it easier to find the required field of view.
With five, independently selectable sections, the detector can be switched to give atomic number contrast, topographic or 3D images.
• Hitachi High-Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
