Product category:
Mechanical testing equipment
News Release from: Indentec Hardness Testing Machines | Subject: Rockwell
Edited by the Laboratorytalk Editorial
Team on 20 November 2002
Pinpointing test areas of internal teeth
A fixture for accurately locating hardness test points on internal gear teeth enables Rockwell tests to be made precisely and repeated
A fixture for accurately locating hardness test points on internal gear teeth has been developed by Indentec Designed for helical teeth on ring gears, the fixture enables Rockwell tests to be made precisely and repeatedly on test areas as narrow as 1.25mm
This article was originally published on Laboratorytalk on 15 Oct 2002 at 8.00am (UK)
Related stories
Three-in-one hardness tester
Designed to carry out Rockwell, Vickers, and Brinell tests to official standards, this saves having to buy extra kit to meet requirements involving two or more hardness scales
The ring gear is mounted in a vee block on the machine's test table and the spaces between the target tooth and its neighbours are probed by conical pins.
This action rotates the gear, which is then clamped to position the test point beneath the machine's nose mounted indenter.
If required, a series of hardness tests can be carried out along the tooth length.
According to Indentec, the fixture not only heightens repeatability but also improves the testing process and saves time by eliminating the need to position awkwardly narrow test areas by hand.
The fixture is used on a standard Indentec digital Rockwell tester with a built-in touchscreen for control, monitoring and data processing.
• Indentec Hardness Testing Machines: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
