Product category:
Mechanical testing equipment
News Release from: Indentec Hardness Testing Machines | Subject: Accredited standardising machines
Edited by the Laboratorytalk Editorial
Team on 04 March 2003
Come and have a go if you think you're
hard enough
Approved standardising systems for Rockwell, Vickers, and Brinell scales is a response to growing concern in industry about the maintenance of hardness standards
Indentec has launched a series of accredited standardising machines for institutions and manufacturers keen to ensure that the hardnesses are always measured precisely to official standards The hardness testing specialist says that the introduction of approved standardising systems for Rockwell, Vickers, and Brinell scales is a response to growing concern in industry about the maintenance of hardness standards as quality demands become more stringent
This article was originally published on Laboratorytalk on 25 Sep 2002 at 8.00am (UK)
Related stories
First robotic Vickers tester?
Company believes it is the first to engineer a digital Vickers hardness testing machine for fully robotic operation
Bullet points for hardness testing
No less than nineteen different specimens can be supported for hardness testing by a single fixture
With standardising machines, users can trace the calibration of all their in-house hardness testers directly to the official hardness reference source.
The first to develop standardising machines for the three most widely used scales, Indentec says that the systems are engineered to calibrate hardness test blocks to within plus/minus 0.1% of the test force, as required by the relevant standard.
The machines are based on standardising models in Indentec's own standardising laboratory, which is accredited by Ukas for the three scales.
All touchscreen controlled benchtop units, they are driven by customised software and use proven deadweight technology, rather than load cells, to ensure calibration stability over the long term, with no drift.
As the blocks are calibrated, the hardness data is processed automatically by the software to produce the usually detailed statistics needed for traceability.
A dedicated range of optional accessories can be supplied to enable the machines to perform the varied testing functions that characterise standardising work.
• Indentec Hardness Testing Machines: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
