Product category:
Vacuum pumps and compressors
News Release from: Ilmvac UK | Subject: MPC301Z Ex, MPC601T Ex
Edited by the Laboratorytalk Editorial
Team on 16 June 2004
Vacuum pumps comply with Atex
requirements
Pumps suitable for use with solvent and acid vapours comply with the stringent requirements of the Atex directive for hazardous areas
Two new models from Ilmvac comply fully with the stringent requirements of the Atex directive for hazardous areas The MPC301Z Ex has a flow rate of 2.3m3/hr and a final vacuum of 8mbar making it suitable for many applications where safe removal of potentially explosive gasses and vapours is critical
Where higher boiling point solvents must be removed the MPC601T Ex model can be used.
With a final vacuum of 2mbar and higher flow rate of 4.5m3/hr this pump out performs any other Atex rated pump available today, according to Ilmvac.
Both models have the facility to purge the drive mechanism with nitrogen when required.
They are suitable for use with solvent and acid vapours. Request a free brochure from Ilmvac UK ...
• Ilmvac UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
