Product category:
Metering pumps
News Release from: Integrated Dispensing Systems | Subject: CeramPump
Edited by the Laboratorytalk Editorial
Team on 23 January 2002
Valveless dispensers and metering pumps
Integrated Dispensing Systems announces the introduction of a new range of CeramPump valveless dispensers and metering pumps, having just a single moving part
These pumps are designed for laboratory, analytical, industrial and OEM applications The valveless pumping function is accomplished by the synchronous rotation and reciprocation of the ceramic piston in the precisely mated ceramic cylinder liner
This article was originally published on Laboratorytalk on 24 Jan 2002 at 8.00am (UK)
Related stories
Industrial dispenser
The FMI IDS-2000 industrial dispenser is designed for fluid dispensing and metering applications, and is suited for industrial process environments where accuracy, precision, and reliability matter
One complete piston revolution is required for each suction/discharge cycle.
The piston always bottoms for maximum fluid and bubble clearing.
Moving the pump head position changes the piston stroke length and in turn the flow rate.
Infinite fine flow adjustments between from 0 - 100% flow rate are possible.
An optional flow rate indicator provides for accurate and simple linear calibration.
The flow rate can even be changed while the pump is operating or at rest.
Some of the benefits of these pumps are: no valves to clog, hang-up or service; one moving part (the piston); accuracy of better than +/- 1% (drift free); precision dispensing - CV of 0.5% or better; flow rates from microlitres to 4600ml/min; positive displacement up to 100psig (back pressure); viscosity independent.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
