Product category:
Temperature, pressure and flow measurement
News Release from: Kistler Instruments | Subject: SLM 425
Edited by the Laboratorytalk Editorial
Team on 22 September 2004
A sense of history
Piece of junk collected from a rubbish skip turns out to be 50 year-old pressure sensor, still within original specification
Student Tim Hands spotted a glint of steel in a rubbish skip, outside the Cambridge University engineering department, that turned out to be an old pressure sensor Thinking that it might be useful, he put the sensor into a drawer
This article was originally published on Laboratorytalk on 27 May 2004 at 8.00am (UK)
Related stories
Miniature pressure sensor uses new technology
Piezoresistive absolute pressure sensor employs direct chip exposure technology to provide superb linearity, minimal hysteresis and an extremely high natural frequency
Years later, working for engine emission control specialist Cambustion, an independent company with close links with Cambridge University engineering department, Hands needed a sensor for a project and remembered the one he had found in the skip.
The only identification on the sensor was 'SLM 425 Swiss' so Cambustion asked Swiss sensor manufacturer Kistler Instruments if they could supply a cable to fit.
Kistler recognised the sensor as one it had sold in 1954 and, while it could supply a suitable cable, the opportunity to acquire an SLM sensor was too good to miss.
Cambustion was happy to accept the offer of one of Kistler's latest miniature M5 pressure sensors in exchange for the SLM.
On its return to Switzerland, the fifty year-old sensor was put through its paces in the Kistler calibration laboratory where it was found to be in good working order.
Isolation was well within the original specification and re-calibration proved to be as simple today as it was in 1954.
Although no one would expect a sensor to be guaranteed for fifty years, Kistler says this does show that its sensors should not be consigned to the rubbish bin too early.
• Kistler Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
