Product category:
Mechanical testing equipment
News Release from: Kistler Instruments | Subject: Kistler type 9215
Edited by the Laboratorytalk Editorial
Team on 24 June 2005
Measure millinewtons in tension or
compression
Piezoelectric force sensor for tensile and compression forces ranging down to a few millinewtons is exceptionally compact, with a front external diameter of only 5mm
Kistler says its type 9215 piezoelectric force sensor for tensile and compression forces ranging down to a few millinewtons is exceptionally compact With a front external diameter of only 5mm, the 9215 is said to be the smallest sensor in its class, complementing the 10mm external diameter type 9203 force sensors
This article was originally published on Laboratorytalk on 27 May 2004 at 8.00am (UK)
Related stories
Miniature pressure sensor uses new technology
Piezoresistive absolute pressure sensor employs direct chip exposure technology to provide superb linearity, minimal hysteresis and an extremely high natural frequency
The 9215 is very robust, offering extremely high rigidity against lateral forces and with two calibrated measuring ranges (100% and 10%).
The sensor body has an M5x0.5 external thread and the force is transmitted via an M2 threaded hole at the front of the sensor.
The very small size makes the sensor ideally suited for use in constricted spaces.
It facilitates the product testing of switches, push buttons, connectors and springs and for highly sensitive force measurement in research and development, for example in micromanipulators.
The 9215, miniature measuring platforms, and sensor arrays can be reduced to grid spacing as small as 7.5mm.
Typically, this permits the testing of mobile phone keypads to be carried out in just one test station.
• Kistler Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
