Product category:
Data acquisition software
News Release from: Kyle Electronic Design | Subject: Vinstrumentation
Edited by the Laboratorytalk Editorial
Team on 17 May 2001
PC-based display, data acquisition and
control
Running on a PC, Vinstrumentation provides a complete low cost real time display, data acquisition and control system. : the combination of VInstrument software and VInterface hardware
Running on a PC, Vinstrumentation provides a complete low cost real time display, data acquisition and control system Virtual Instrumentation is provided by the combination of VInstrument software and VInterface hardware
This article was originally published on Laboratorytalk on 14 Jul 2000 at 8.00am (UK)
Related stories
I/O pods turn PC into data logging system
The Virtual Logging system from Kyle Data turns the ubiquitous Windows/PC environment into a low cost comprehensive data logging system.
Low cost Virtual Instrument Interface for PC
The Experimenter interface box turns a PC into an 8 channel display oscilloscope, 8 panel meters, 2 channel signal generator, event recorder, 8 bit pattern generator and many other instruments.
Vinterface provides 8 channels of data acquisition (to +-10V) with sampling rates up to 10000 samples/sec, 2 control channels (+-5V), 8 logic inputs and 8 logic outputs.
All I/O connections are via 4mm sockets.
Systems can be stimulated with the 2 channel arbitrary waveform genarator and the results displayed and logged using the 8 channel oscilloscope/chart recorder which can display results in engineering units.
The logic I/O provides event recording and logic analyser functions.
VInstrument software also works with the VIPS pods I/O system.
The VInstrumentation system is designed for teaching and research laboratories where the experimental setup can change on a minute-to-minute basis.
Experimental setups can be saved so that experiments can easily be repeated.
Additional application packages are also available.
VInstrumentation Logging System (VILS) provides advanced data logging with features such as logging by time, at time or on alarm.
Logging can be single shot or can be repeated.
VInstrumentation Control Laboratory (VICL) uses the hardware/software combination to allow processes to be controlled.
The control test signal can be generated, the output measured and the control action calculated to drive real plant.
All the controller signals - Input, Output, Error, Drive etc are shown on the real-time chart display.
VICL can be used for open-loop system testing and bang-bang, proportional only, proportional+velocity feedback and PID control.
The complete system is easy to use in a teaching environment using real or simulated plant.
• Kyle Electronic Design: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
