Calibrate your torque wrench

These highly accurate units measure static torque in both the clockwise or counterclockwise direction and can be used as a reference standard for most torque wrench types

Lebow Products introduces its new model 6736 series torque wrench checkers.

Well suited for use in fastening market but can also be used in such applications as R and D, process control, quality assurance, calibration, or even in OEM situations.

These highly accurate units measure static torque in both the clockwise or counterclockwise direction.

Can be used as a reference standard for most torque wrench styles such as click action, break back, or dial indicator.

The Lebow Model 6736 series covers torque ranges from 50ft.lbs to 1000ft.lbs in five different rated capacities and drive sizes.

Compatible with most strain gauge signal conditioner/readouts.

Each unit is fully temperature compensated from 70F to 170F with a useable temperature range from -65F to 200F.

It features an overall accuracy rating of better then +/- 0.25% of rated output with sensitivity output of 2mV/V nominal.

The bridge resistance is 350 ohms with an insulation resistance of over 5000 megaohms.

All sensors are dead weight calibrated with standards traceable to the NIST.

All units have a safe overload protection rating of 150% with an ultimate overload of 200%.

Back to top