Product category:
Laboratory furniture and storage
News Release from: Linos Photonics | Subject: 63-500 series
Edited by the Laboratorytalk Editorial
Team on 11 May 2006
Vibration free working surfaces for
loads to 160kg
These modular tables are recommended for applications such as electrophysiology, cell injection, ultramicrotomy, photomicroscopy, scanning tunnel microscopy and scanning microscopy.
The 63-500 series lab tables manufactured by TMC, and distributed in the UK by LINOS Photonics, provide excellent vibration free working surfaces for loads upto 160Kg With the key element to isolation being the gimbal piston isolator, it is possible to achieve isolation down to very low levels in both vertical and horizontal axis
This article was originally published on Laboratorytalk on 19 Sep 2005 at 8.00am (UK)
Related stories
Ten years of piezoelectric vibration control
Six degree-of-freedom active cancellation system employs geophones to sense ambient building floor vibration and piezoelectric actuators to drive the payload with equal and opposite force
Available with TMC's patented Clean Top II, this option consist of a spill proof, drilled and tapped mounting hole array.
Using a small cell size, steel honeycomb centre in the construction allows for a highly stiff, well damped platform with a guaranteed flatness of +/-0.13mm.
Tops are 100mm thick and have either one-quarter 20 or M6 tapped holes.
Other tops are also available as either stainless steel top, plastic laminate on stainless steel, or the CleanTop II.
Along with this a large range of accessories are available form arm rests and support bars, through to faraday cages and hanging shelves.
• Linos Photonics: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
