Visit the Metrohm UK web site
Click on the advert above to visit the company web site

Product category: Chemical analysis equipment
News Release from: Metrohm UK | Subject: 712
Edited by the Laboratorytalk Editorial Team on 19 February 2003

Modern conductivity measurement at its
best

Multiple applications for this conductometer offering conductivity measurements in the range 0.001 microsiemens/cm to 20 siemens/cm with automatic range switching

The Metrohm 712 conductometer has a wide range of uses Two lines of 16 alphanumeric characters each are available for the sample identification

Designation and serial number of the instrument as well as date and time appear on the printout.

A typical GLP component: the last calibration of the measuring cell and the last determination of the temperature coefficient can be verified.

Conductivity measurements in the range 0.001 microsiemens/cm to 20 Siemens/cm with automatic range switching.

Temperature measurement from -170C to 500C.

TDS measurements (total dissolved solids (salinity) 0.5mg/l - 300g/l NaCl) With 'frequency auto', the 712 Conductometer automatically selects the measurement frequency best suited to the sample (300Hz or 2.4kHz).

'Auto zero' sets the current conductivity to zero.

Changes can thus be followed with a higher resolution.

The freely selectable reference temperature allows matching to the measurement instructions of many different standards.

The switching, alarm or limit outputs, which can be used in all measurement modes as a minimum/maximum make or break contact with hysteresis adjustment, are popular additional functions for open- and closed-loop control tasks. Request a free brochure from Metrohm UK ...

Metrohm UK: contact details and other news
Email this article to a colleague
Register for the free Laboratorytalk email newsletter
Laboratorytalk Home Page

Search the Pro-Talk network of sites

Visit the Metrohm UK web site