Product category:
Lab automation equipment and robotics
News Release from: Metrohm UK | Subject: 813
Edited by the Laboratorytalk Editorial
Team on 27 June 2003
Compact autosampler for voltammetry
Economical and space-saving autosampler for automation in voltammetry allows analysis of small series of similar samples with high accuracy and precision
Metrohm's 813 compact autosampler is the new economical and space-saving autosampler for automation in voltammetry It can be used in combination with the 797 VA Computrace as well as with the 746 VA trace analyser
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
It allows analysis of small series of similar samples with high accuracy and precision.
Up to 18 samples can be analysed automatically in a sequential procedure.
The sample solution is transferred from the sample vessel on the rack of the 813 compact autosampler into the measuring vessel of the 797 VA Computrace or of the 747 VA stand via a built-in peristaltic pump.
All auxiliary solutions required for the voltammetric analysis are added by Dosinos during the measuring procedure.
The peristaltic pumps of the two attached 772 pump units rinse and empty the vessel after each analysis.
The 813 compact autosampler is programmed via a separate keyboard that can also be used to adjust the sample lift position.
During the analysis sequence the sample changer is controlled by an impulse via the remote interface sent from the 797 VA Computrace or the 746 VA Trace Analyser. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
