Product category:
Titration equipment
News Release from: Metrohm UK | Subject: 746 VA trace analyser
Edited by the Laboratorytalk Editorial
Team on 10 September 2003
Black smokers yield their secrets
Description of the voltammetric determination of different chromium species in solutions retrived from the vicinity of deep ocean hydrothermal chimneys
Hydrothermal chimneys are formed at tectonically active sites on the sea floor Cold sea water seeps into cracks and crevices of the basal-tic rocks and is heated to more than 300C in the sea bed
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
On-line lactic acid analysis of dairy products
Determination of lactic acid in milk and associated dairy products is an extremely common laboratory application and has key product quality control use in a modern dairy
During this process, trace elements are leached from the rocks and then transported into the surrounding sea water when the hot solution emerges from the sea floor.
The change in temperature causes the immediate precipitation of the less soluble compounds; these form chimneys that may be several meters high.
It is assumed that the hydrothermal solutions are one of the main sources of many heavy metals in sea water.
Further reading
Analysis of sugars in chocolate bars
The analysis of the different sugars present in a bar of chocolate can reliably and affordably be quantified using pulsed amperometric detection (PAD) with the 817 Bioscan from Metrohm
Determining aluminium level in deodorant matrix
Body odour is never pleasant, and we've all been crammed on a train or been in a busy shopping centre and noticed the distinctive smell of stale sweat
Fast, accurate, Karl Fischer for difficult samples
The water content of many samples is difficult to determine because they are only slightly soluble in alcohols, contaminate the titration cell or undergo side reactions with the Karl Fischer reagent
Little is known about the chemical valency and form of bonding of most of the metals in the hydrothermal solutions.
Due to the presence of hydrogen sulphide these solutions have reducing properties.
After their release they rapidly mix with the surrounding sea water, which contains oxygen.
As a result of this the valency and configuration of any metals present can alter very quickly.
Oxidation by sea water components can occur.
In addition some of the metal ions form complexes very rapidly.
The presence of certain chromium species is used as an indicator for the redox conditions prevailing in the hydrothermal solutions and the surrounding sea water.
The various chromium species differ not only in their chemical behavior, but also in their effects on the biosphere.
Cr(III) is more strongly adsorbed on particles and less quickly taken up by sea organisms than Cr(VI), which is present in sea water mainly as dissolved chromate.
As it is a very strong oxidising agent, Cr(VI) also has a considerably more toxic effect on organisms.
There is thus a direct connection between the degree of oxidation of chromium and its biological availability.
Sea water sampling was carried out by means of a probe equipped with so-called Niskin bottles.
Sea water samples were taken at various depths down to approximately 2000m.
Sampling directly at the hydrothermal vents was carried out with the aid of a special sampling system (Hydro Bottom Station, HBS).
This allows water samples to be taken 15cm below and 100cm above the sea floor.
Thanks to the two sampling systems it was possible to obtain a depth profile of the chromium concentration in the water column above the tectonically active zones.
Instruments and accessories used included the 746 VA trace analyser with the 747 VA stand was used for the voltammetric analyses.
The chromium determination was carried out at the HMDE.
An Ag/AgCl system with c(KCl) = 3 mol/l was used as the reference electrode, a platinum electrode as the auxiliary electrode.
The 705 UV digester was employed for the UV digestions.
In the reducing environment at the hydrothermal vents chromium is mainly present as Cr(III).
The measured concentrations range up to 2.5ug/l.
In contrast, in normal sea water less than 0.5ug/l chromium is usually found, mainly as Cr(VI).
The reduced form could be detected up to 100m above the sea floor.
It could also be shown that Cr(III) is then mostly complexed by organic compounds or bound to particles.
In normal sea water a slow oxidation of Cr(III) to Cr(VI) occurs. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
