Product category:
Titration equipment
News Release from: Metrohm UK | Subject: On-line dialysis
Edited by the Laboratorytalk Editorial
Team on 21 October 2003
Sugar determination in dairy products
The separation of the low-molecular sugars from the high-molecular proteins is determined exclusively by the osmotic pressure at the membrane
In food chemistry the determination of sugars in dairy products is of the utmost importance When carrying out direct ion chromatographic determinations the precipitation of protein constituents on the column is a recurring problem
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
On-line lactic acid analysis of dairy products
Determination of lactic acid in milk and associated dairy products is an extremely common laboratory application and has key product quality control use in a modern dairy
Instead of demanding precipitation procedures the dialysis technique can be used to separate the interfering protein matrix.
The use of dialysis as an inline sample preparation step results in a rapid automated analysis system.
The sugar constituents are determined by means of pulsed amperometric detection.
The problem.
Sugar analysis plays an important role in food control.
In many cases, as the low-molecular sugar constituents are readily soluble, sample preparation is straightforward and rapid.
However, the analysis of protein-containing samples can pose severe problems.
Precipitation of the proteins affects the column and ultimately destroys it.
This can be prevented if demanding precipitation procedures (eg Carrez precipitation) are carried out before the analysis.
However, such sample preparation steps may lead to co-precipitation, inclusion or even decomposition of the sugars to be determined.
The solution.
On-line dialysis can solve the problem.
The separation of the low-molecular sugars from the high-molecular proteins is determined exclusively by the osmotic pressure at the membrane.
This means that, due to the concentration difference existing across the cellulose membrane, the sugars migrate from the sample stream into the acceptor solution (eg ultrapure water) whereas the high-molecular protein constituents stay on the sample side of the membrane.
This sample preparation step occurs inline and can therefore be completely automated.
The time needed is negligible as the dialysis is performed during the recording of the previous sample's chromatogram. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
