Product category:
Titration equipment
News Release from: Metrohm UK | Subject: Bromate analysis
Edited by the Laboratorytalk Editorial
Team on 31 October 2003
Bromate analysis in drinking water
Three possible ways to get a good result in the determination of bromate, a by-product of water purification by ozone
Bromate in drinking water is a by product of water purification by ozone This anion is suspected to be harmful and therefore has to be monitored in water quality control
The concentrations usually encountered are in the low ppb range and below, which is close to the detection limit of ion chromatography with suppressed conductivity detection.
As an alternative ion chromatography with post column reaction and optical detection may be used.
The two known methods are post column reaction with o-dianisidine (as described in EPA 317.0), and post column reaction with iodide (as described in EPA 326.0).
For each of these methods including conductivity detection a new application note is available.
Application note N-47 is of special interest as this method uses no toxic chemicals and allows to reach extremely low detection limits (50 ng/l). Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
