Product category:
Titration equipment
News Release from: Metrohm UK | Subject: Voltammetry instruments
Edited by the Laboratorytalk Editorial
Team on 14 March 2007
Voltammetry analysis of iron in power
plant waters
Water is at the source of all thermal power plants as it enables cooling, expanding water vapour drives the turbines and water moderates the nuclear fission
Thermal power plants are at the core of the industrial society that we in the United Kingdom live in today and no matter whether the plant is nuclear of fossil fuel driven, its safe and reliable operation is critical and must be guaranteed Water is at the source of all thermal power plants as it enables cooling, expanding water vapor drives the turbines and water moderates the nuclear fission
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
On-line lactic acid analysis of dairy products
Determination of lactic acid in milk and associated dairy products is an extremely common laboratory application and has key product quality control use in a modern dairy
In fossil fuel and nuclear power plants a wide range of chemical reactions take place, some are related to normal operation but other provide important information about current or potential future faults.
Any metal corrosion of the metal components inside a power plant is caused by a reaction (pH dependant) between hydronium ions and oxygen reacting with the metal ions present.
Magnetite (a form of iron oxide) is used to keep the pH between 9.8-10.5 which keeps the surface of the boiler tubes active and helps prevents corrosion.
Further reading
Analysis of sugars in chocolate bars
The analysis of the different sugars present in a bar of chocolate can reliably and affordably be quantified using pulsed amperometric detection (PAD) with the 817 Bioscan from Metrohm
Determining aluminium level in deodorant matrix
Body odour is never pleasant, and we've all been crammed on a train or been in a busy shopping centre and noticed the distinctive smell of stale sweat
Voltammetry (VA) can be used to determine the iron content in power plant waters, quantification of iron is important as this is a key corrosion indicator and allows any onsite maintenance to be pre-emptive rather than reactive which to the power plant operator is a much more costly scenario.
If there are appreciable iron deposits these can also inhibit heat transfer making the power plant less efficient which can result in a boiler blow-down whereby the unit comes off line for essential maintenance.
Should this happen then the individual power plant is not operating at peak performance and generates less power - potentially the national grid has to source this short fall from elsewhere to supply the consumer - and the owners of the power plant lose important revenue making such a chain of events commercially undesirable and best prevented if possible.
Voltammetry (VA) can be used to quickly ensure that the iron content poses no risk to the continual and safe operation of a power plant using a bromate/tri-ethanolamine electrolyte that buffers the solutions to pH>9.5.
Voltammetry is a technique first introduced by Heyrovsky in 1922, but in recent years outstanding advances from Metrohm have been made with regard to the measuring cell and PC control system so that today VA represent a clean, reliable and robust technique that gives quality results day in day out.
A typical instrument configuration would be the Metrohm MVA 1 Voltammetry system.
Full control of the instrument is through the PC and a result of this key corrosion indicator (iron) obtained in little over ten minutes.
A major advantage of VA is the use of standard addition for calibration which eliminates many of the matrix effects seen in spectroscopic techniques.
Voltammetry has official established methods and two final points of importance are the running costs themselves which are minimal with no expensive gases required and the footprint which occupies less than a metre, essential in laboratories or control rooms where space is at a premium. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
