Product category:
Titration equipment
News Release from: Metrohm UK | Subject: 743 Rancimat
Edited by the Laboratorytalk Editorial
Team on 06 April 2007
Oxidative stability of petrodiesel and
biodiesel
Metrohm says it has the solution for measuring the oxidative stability of petrodiesel, biodiesel and blends of both types of fuels
Oxidation stability of diesel and biodiesel blends with the 743 Rancimat according to EN 14112 Test Method The oxidation stability of fatty acid methyl esters has already been included in various test methods as a standard parameter used to define the minimum quality requirements of biodiesel:
This article was originally published on Laboratorytalk on 20 Aug 2007 at 8.00am (UK)
Related stories
Rancimat method saves time evaluating antioxidants
The 743 Rancimat instrument from Metrohm UK is designed to evaluate the effects of antioxidants on edible oils and food products containing oils and fats
Determining the oxidation stability of biodiesel
The Metrohm 743 Rancimat is a modern, PC-controlled analytical instrument for the comfortable determination of the oxidation stability of biodiesel (fatty acid methyl esters, Fame)
EN 14214 Automotive fuels - Fatty acid methyl esters (Fame) for diesel engines - Requirements and test methods.
EN 14112 Fat and oil derivatives - Fatty acid methyl esters (Fame) - Determination of oxidation stability (accelerated oxidation test).
Metrohm propose that the Rancimat can also be used to define the oxidative stability of petrodiesel and petrodiesel/biodiesel blends.
Further reading
Technique for analysis of biodiesel
The manufacture and use of fatty acid methyl esters (Fame), has huge implications for the environment; biodiesel is the name of a clean burning alternative fuel, produced from renewable resources
Determination of oxidative stability
An automated version of the extremely demanding active oxygen method for the determination of the induction time of natural fats and oils
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
Sufficient oxidation stability (ageing behavior) of any fuel is a basic requirement to guarantee a failure-free operation of the fuel injection equipment within the diesel engine.
EN 590 (European standard for diesel quality requirements) states that aging behavior is characterized as polymer (sludge) content of artificially aged fuel according to EN 12205.
This method was developed for petrodiesels.
The analysis of biodiesel (Fame) blends are not included in this method and EN 12205 does not discriminate well between different diesels and B5 (5% Fame, 95% diesel) blends, the Rancimat method (EN 14112) is a potential alternative.
Sludge determination EN 12205 / ASTM D 2274.
350 mL of sample is heated to 95C for 16 hours while oxygen is bubbled through the sample at a rate of three litres per hour.
The sludge (polymer content) is then determined gravimetrically after filtering.
The limit is 25g/m.
The disadvantages of this method include a high sample volume, a long measurement time and the determination has many manual, time consuming steps.
Rancimat method EN 14112 - advantages.
Unlike EN12205, this method is applicable to Fame, petrodiesel and biodiesel blends and as the oxidative stability of the different types of fuels is determined on the same instrument, the results are directly comparable.
The Rancimat method offers a realistic aging determination, which is not the sludge forming potential of artificially aged fuels which has no field relevance.
The Rancimat also provides automatic evaluation as an induction point is reached which indicates when a sample becomes unstable.
This measured by an increase in conductivity as the sample starts to degrade.
A suggested limit is 20 hours.
In addition, the sample amount (3.0-7.5g) is much smaller than the sludge method and expenditure of human labour is significantly reduced because there is no sample preparation and no time consuming manual procedures.
The Rancimat method gives a direct determination of stability.
The sludge method shows there was no real trend for increased instability as the fuels measured increased in age.
The Rancimat method EN 14112 did pose initially a few problems, mainly sample evaporation due to the low boiling point of petrodiesel, around 170-306C, while biodiesel is >200C.
Therefore the method parameters were modified.
The evaporation problem was solved by an increased sample volume and using longer reaction vessels.
The loss by evaporation was overcome as the sample was reflux condensed in the longer vessels.
Conclusions.
When the two methods were compared Metrohm concluded: for standard test method EN 12205 there was insufficient characterisation of the oxidation stability.
There was no field relevance of the sludge forming potential.
For the Rancimat method EN 14112; there was good characterisation of the oxidation stability for biodiesel, petrodiesel and diesel/biodiesel blends and because of the induction point method; there was direct determination of the real aging reserve.
Therefore, the modified Rancimat is suitable for measuring the stability of petrodiesel, biodiesel and blends of both types, says Metrohm. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
