Product category:
Titration equipment
News Release from: Metrohm UK | Subject: Ion chromatography and suppressed conductivity
Edited by the Laboratorytalk Editorial
Team on 16 April 2007
Determine sulphate in denatured ethyl
alcohol
In times of rocketing gasoline prices, ethanol - mainly derived from the fermentation of sugar cane (in Brazil) and corn (in the USA and Canada) - is a promising renewable high-octane vehicle fuel
A major drawback to the use of ethanol is the contamination with inorganic salt ions such as chloride, nitrate and sulphate These ions can affect the engine performance because precipitating salts clog filters and fuel injector nozzles
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
Furthermore, these ions enhance corrosion in the vehicle components in contact with the fuel.
Hence there is an urgent need for standards defining quality specifications and test methods.
While the analysis of sulfate is specified in a number of ASTM standards, until recently, the ASTM D 4806-06b standard - the specification for denatured fuel ethanol - provided no guidelines for total and potential sulfate.
Recognising the need for validated methods for quality control, ASTM balloted and approved a sulphate specification for fuel ethanol stipulating a maximum level of sulfate in ethanol of four parts per million (ppm).
In this paper a convenient direct injection suppressed ion chromatographic method for determining chloride and sulphate in denaturated ethanol samples is presented.
The method complies with ASTM D 4806-06c. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
