Product category:
Titration equipment
News Release from: Metrohm UK | Subject: 794 Titrino
Edited by the Laboratorytalk Editorial
Team on 19 April 2007
Testing of water for P and M alkalinity
A much better way to analyse for P and M alkalinity is by an autotitrator, for example a Metrohm 794 Titrino, which can titrate to the correct pH's notably 8.3 and 4.3
Water that contains high levels of alkalinity has a bitter taste De-alkalisation removes alkaline salts from water supplies to reduce scale formation, the chance of corrosion and removes bitter taste
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
On-line lactic acid analysis of dairy products
Determination of lactic acid in milk and associated dairy products is an extremely common laboratory application and has key product quality control use in a modern dairy
Most natural waters contain alkalines that result from the attack of carbon dioxide on various alkaline minerals it contacts.
Limestone, in particular, is dissolved by carbonic acid (carbon dioxide dissolved in water) to yield calcium and magnesium bicarbonate.
These salts are referred to as temporary hardness due to their ability to decompose and form scale upon heating.
Carbon dioxide, which is corrosive to metal surfaces, is also formed.
Usually, several ions in water supplies contribute to the alkalinity.
Keeping it simple, alkalinity is due to the presence of bicarbonate, carbonate and hydrate (hydroxide) ions.
However, ions such as phosphate and silicate potentially may contribute to alkalinity.
The type of alkalinity found in water depends on the pH, such as P-alkalinity (phenolphthalein) and M-alkalinity (methyl orange).
The P and M alkalinity values are determined by measuring the acid neutralising ability of a water supply to a set pH value.
P-alkalinity is measured down to a pH of 8.3.
The M-alkalinity is measured down to a pH of 4.3.
The M-alkalinity is also called the total alkalinity.
Alkalinity is normally measured in parts per million (ppm) as calcium carbonate.
The different types of alkalinity present can be calculated from the P and M values reported.
Analysis can be performed manually by using the indicators above.
However, this is subjective as individual people will 'see' the endpoint differently.
The titrant used is normally 0.1Mol/L HCl, and a combined pH electrode is used as the indicator electrode to follow the path of the reaction and to ascertain the endpoints.
The Aquatrode Plus electrode has been specially developed for the titrimetric determination of the alkalinity (p and m values) in weakly buffered solutions such as drinking water.
Its pH glass membrane is made of a new type of special glass that is characterized by very short response times.
The shape of the electrode's fixed ground sleeve diaphragm has also been optimised.
As a result it has been possible to increase the reproducibility of the electrolyte outflow while at the same time minimizing the dependence on the stirring speed. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
