Product category:
Titration equipment
News Release from: Metrohm UK | Subject: Application bulletins 204 and 141
Edited by the Laboratorytalk Editorial
Team on 21 June 2007
Application monographs on edible oils
analysis
The Rancimat method is considerably less costly, less labour-intensive but as accurate as the traditional active oxygen method (AOM) for the oxidation stability index (OSI) of natural fats and oils
Fats are an important component of our diet because they contain essential substances as polyunsaturated fatty acids Fats are also necessary for absorbing the essential fat-soluble vitamins (A, D, E and K) which are beneficial for health
This article was originally published on Laboratorytalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Analysis of mercury in waters using voltammetry
Jonathan Bruce, Applications Manager for Metrohm UK, provides this comprehensive introduction to analysis of mercury in waters
On-line lactic acid analysis of dairy products
Determination of lactic acid in milk and associated dairy products is an extremely common laboratory application and has key product quality control use in a modern dairy
Therefore at least a minimal intake of fat is necessary.
Providing 9kcal of energy per gram, fats are a very concentrated source of energy for the human body.
Fat is primarily found in meat and dairy products but also in plants (eg, seeds, soybeans, olives, nuts).
Further reading
Analysis of sugars in chocolate bars
The analysis of the different sugars present in a bar of chocolate can reliably and affordably be quantified using pulsed amperometric detection (PAD) with the 817 Bioscan from Metrohm
Determining aluminium level in deodorant matrix
Body odour is never pleasant, and we've all been crammed on a train or been in a busy shopping centre and noticed the distinctive smell of stale sweat
Fast, accurate, Karl Fischer for difficult samples
The water content of many samples is difficult to determine because they are only slightly soluble in alcohols, contaminate the titration cell or undergo side reactions with the Karl Fischer reagent
Most foods contain some fat.
The main components of a basic unit of fat are three fatty acids individually bound to glycerol.
Especially animal fats and food containing animal fats (eg, lard, butter, meat sausages) as well as fats from tropical plants (coconut fat, palm fat) are rich in saturated fatty acids.
Whereas saturated fatty acids do not posses any carbon-carbon double bonds, monounsaturated fatty acids do have one.
Examples of vegetable oils rich in monounsaturated fatty acids are olive oil, rape oil and peanut oil.
These also contain high amounts of oleic acid.
When there is more than one carbon-carbon double bond present in a fatty acid then it is polyunsaturated.
Most vegetables contain polyunsaturated fatty acids.
Examples of oils rich in polyunsaturated fatty acids are safflower oil, sunflower oil, soybean oil, corn oil and cottonseed oil.
Fish also contain large amounts of unsaturated fatty acids.
Metrohm has a variety of proven methods and instrumentation for the determination of the quality of fats and oils at hand.
The oxidative stability of fats determined with Metrohm's 743 Rancimat.
Natural fats are mixed triglycerides of mostly saturated and some unsaturated fatty acids.
Common vegetable and animal fats are coconut fat, palm fat, margarine and butter.
Oxygen can oxidise fatty acids in a multi-step reaction that occurs in principle according to a radical chain mechanism.
The oxidation products formed by this reaction (mainly formic acid) are volatile.
Antioxidants prevent the degradation of oxidation-sensitive vitamins, amino acids and unsaturated fatty acids.
Determination of the oxidative stability.
The determination of the oxidative stability of natural fats is a standard quality control method in the food industry.
Metrohm's 743 Rancimat offers an easy and fast method to determine the oxidation stability index (OSI) of natural fats.
Air is blown through the heated and thermostatted sample (50-220C) in order to oxidise it.
The stream of air then carries over the volatile oxidation products (normally formed at the end of the oxidation process) to a measuring vessel containing deionised water.
The readings of the conductivity measurement can be plotted as a function of the time required for the oxidation.
The inflection point of this oxidation curve is known as the induction time which serves as a measure of quality of the fat tested.
Product information.
The 743 Rancimat is an instrument with two separate heating blocks.
The temperature of each block, containing four disposable sample vessels, can be controlled separately.
This setup allows the easy and time saving analysis of several different oils simultaneously.
In addition the 743 Rancimat allows predicting the shelf lives of natural oils and fats.
Get more information from Metrohm's free Application bulletins 204 and 141. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
