Product category:
Water purification
News Release from: Millipore | Subject: Synergy
Edited by the Laboratorytalk Editorial
Team on 28 July 2003
Ultrapure water system for small-volume
users
Suitable for smaller laboratories, this system is recommended for applications such as the preparation of HPLC isocratic and gradient solutions
The Synergy system from Millipore is designed to produce ultrapure water (18.2M.cm resistivity at 25C) from pre-treated water on demand, at a flow rate of 1.0-1.2ml/min Suitable for smaller laboratories, this system is recommended for applications such as the preparation of HPLC isocratic and gradient solutions and solutions for spectroscopic analyses
This article was originally published on Laboratorytalk on 3 Jul 2008 at 8.00am (UK)
Related stories
Stainless bins for disposable process containers
Mobius stainless steel bins provide support for handling disposable process containers filled with media, buffer, additional intermediates as well as final products
Plug-and-use purification packs, tailored to the feedwater source, can be easily replaced in seconds.
For sensitive applications requiring ultra-low levels of organics (TOC levels <5ppb) a built-in dual-wavelength UV lamp (185nm and 254nm) is available.
Final point-of-use purification can be obtained by using either a Millipak 0.22um absolute final filter or a Pyrogard D ultrafilter for removal of pyrogens and nucleases.
Automatic recirculation allows the system to maintain water quality in between periods of use and the built-in resistivity meter verifies water quality. Request a free brochure from Millipore ...
• Millipore: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
