Product category:
Lab automation equipment and robotics
News Release from: Micromech | Subject: Nanomotion
Edited by the Laboratorytalk Editorial
Team on 16 February 2005
Ceramic servo motors vs piezo motors
The employment of piezo technology in motion and positioning control solutions is not new, but the technique employed in these ceramic servo motors is said to be innovative and original
Many earlier piezo-drive systems use a number of piezo elements arranged in line to step the positioning stage along, by passing the holding force from one to the other sequentially Other Flexure-types of stage move the load by the amount the element expands when biased by a voltage gradient
This article was originally published on Laboratorytalk on 20 Apr 2005 at 8.00am (UK)
Related stories
Get rid of rumble with nanotechnology
Drives are said to be ideal for nanometric positioning and tracking, because of their compact size to force capability, ultra high vacuum and non-magnetic versions
Miniature positioners for when size really matters
High-precision stage permits rapid linear translation and precise positioning within very small working envelopes
A ceramic servomotor is not a piezo actuator
These novel ceramic servo motors are of a design that lends itself to the fabrication of special micro-miniature linear and rotary motors with the capability of nanometric resolution
Some fine rotary lead-screw stages employ a tuning- fork style operation that causes rotation in a specific direction when a saw-tooth wave form is applied to the piezo element.
In other words, they can act only as a simple actuator or provide limited rotational speed - but none of the above systems are able to effect high speed or forces.
The Nanomotion mechanism utilises a novel X-Y bias on the piezo element to produce an elliptical motion at the driving element tip.
When excited at a carrier frequency of 40kHz with a varying potential, the major axis of the ellipse can be modulated to drive a linear surface at variable speeds using an almost standard servo speed control interface of +/-10V DC.
As the element tip range is around six microns at maximum deflection, it is evident that exceedingly slow and smooth motion can be obtained at much lower voltages of bias.
The motor resolutions go down as low as 5nm and 300 microns per second.
Using a DC mode from the AB 5 amplifier, amazingly the tip can be displaced from +/-10nm, to +/- 6 microns and then returned to the original position.
The motors are available from 0.4 to 3.0kg force, and when coupled in tandem from one drive amplifier can produce linear motion at speeds greater than 300mm per sec with forces in excess of 10kg.
This makes the motors extremely powerful for fine focussing and stage positioning.
Micromech says they are now being extensively applied to exacting processes by companies in the semiconductor, communications and pharmaceutical industries, the drive mechanism also lends itself ideally to peripherally driven rotary stages as used in telescopes and precision rotary tables.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
