Product category:
Lab automation equipment and robotics
News Release from: Micromech | Subject: Servocraft
Edited by the Laboratorytalk Editorial
Team on 06 July 2005
A ceramic servomotor is not a piezo
actuator
These novel ceramic servo motors are of a design that lends itself to the fabrication of special micro-miniature linear and rotary motors with the capability of nanometric resolution
Micromech notes that its recent launch of these nano-motors has failed to get its message across The Servocraft range of nano-motors are a novel ceramic servo motor, a design that the company says lends itself to the fabrication of special micro-miniature linear and rotary motors with the capability of nanometric resolution
This article was originally published on Laboratorytalk on 16 Feb 2005 at 8.00am (UK)
Related stories
Ceramic servo motors vs piezo motors
The employment of piezo technology in motion and positioning control solutions is not new, but the technique employed in these ceramic servo motors is said to be innovative and original
Miniature positioners for when size really matters
High-precision stage permits rapid linear translation and precise positioning within very small working envelopes
Manufactured by Nanomotion of Israel, these patented motors are finding many new design slots once the technology is understood, says Micromech.
The standard larger nano-motors in the Servocraft family are the HR series which are very compact offering dynamic stall forces from 4N with the HR-1 single element unit up to 30N for the HR-8 an eight element unit.
They can be used to drive linear stages and rotary axes via ceramic collars or discs and can achieve resolutions down to below ten nanometres.
Further reading
Get rid of rumble with nanotechnology
Drives are said to be ideal for nanometric positioning and tracking, because of their compact size to force capability, ultra high vacuum and non-magnetic versions
Positioned at the top of the motion control class
Cutting edge controllers can be applied to applications from grinding the corrective lenses for a deep space telescope with sub-nanometric resolution to operating the fastest pick-and-place machines
Tales of motion control 1: genomic print head
Linear motors propel genomic print head at speeds that are a blur to the human eye, lifting DNA-rich fluids from a trough, then delivering them in a flash of motion to 25 separate glass slides
The motion is extremely smooth without any of the normal mechanical disturbance associated with circulating bearings and can run at surface speeds of up to 250mm per sec while having a feasible step resolution of just five nanometres.
The nano-motors can be supplied in ultra high vacuum compatibility to cover environments up to 10 -10 Torr and non-magnetic formats.
Then there is the LS range (low speed) with less force but similar specifications to the HR range and designed to suit low speed applications, which do not exceed 20mm per sec.
The smallest standard production nano-motor is the single element ST type that can be supplied in either standard or vacuum versions.
They have a dynamic stall force of 1.2N and can impart a surface speed of up to 250mm per second.
Even smaller but for volume users is the 'size of a pin' motor the Nanoserv range which are made to suit custom requirements such as miniature digital camera focussing, precise compact medical or pharmaceutical applications.
An exciting feature of the products, it should be noted, is that all of these nano-motors exhibit virtually zero inertia and have a response bandwith of 40kHz so very fast settling time is achieved.
There is a range of drive amplifiers designed to suit varying needs and applications.
All units accept a standard 0-10VDC analogue command signal input which results in zero to maximum linear speed.
The small AB4 amplifier can drive up to four elements, for example two HR-2 motors, whereas the larger AB5 unit can handle up to 32 elements, that is four HR-8 motors.
Multiple amplifiers may be used to drive a quantity of motors and usefully it is not necessary to synchronise the 40kHz-modulation output.
Other amplifier features include step mode for burst pulsing, which is very handy for manual joystick targeting, and a DC flexure mode in which the element is biased into the final position rather than run at speed.
In terms of pricing these drive systems are said to be at the same level as a microstepping drive package but have the advantage of greater accuracy and the obviation of any rotary screw drive components in the assembly.
The Servocraft nano-motors from Nanomotion offer a range which covers most motion tasks in research, science, pharmaceutical, optical, semiconductor, astronomical and light industrial establishments.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
