Product category:
Chemical analysis equipment
News Release from: Palintest | Subject: Waterproof 800
Edited by the Laboratorytalk Editorial
Team on 22 January 2002
Four-in-one meter
Water analysis specialist Palintest has introduced an easy-to-use meter which can measure pH, conductivity, temperature, and total dissolved solids (TDS) in all aqueous solutions
The Palintest Waterproof 800 meter is suitable for use in the field, and its high specification makes it equally suitable for laboratory use, research and for specialist applications Economical in comparison to purchasing separate instruments, the meter has many user-friendly features which are easily accessible through the large, water-resistant membrane keypad
This article was originally published on Laboratorytalk on 26 Feb 2002 at 8.00am (UK)
Related stories
Conductivity meter for water analysis
Lightweight, easy-to-use multi-range conductivity meter offers a range of applications, from testing deionised water through to brine
Easy test for scale and corrosion inhibitor
Fast testing of organoposphonate levels in boiler and cooling water without the traditional problems of pH adjustment and end-point determination
Meter preferences and default calibrations can be customised, the normalisation temperature and TDS factor are adjustable, and the temperature coefficient can be altered for solutions with a different coefficient from that of water.
The meter uses a double-junction pH electrode and a combined conductivity/TDS probe with a temperature sensor, both of which are plug-in for easy replacement.
Temperature is measured from 0 to 100C, and the meter automatically compensates for temperatures between 0 and 80C.
Resolution is 0.1 degree and accuracy is +/-0.3C.
The meter automatically selects from five conductivity ranges, from 0 to 19.99,199.9 or 1999 microsiemens per cm or to 19.99 or 199.9 millisiemens per cm, and can provide a corresponding TDS measurement.
One point in each of the measuring ranges can be calibrated for accuracy.
Resolution is 0.05% of full scale and accuracy is +/-1% of full scale or +/-1 digit.
pH is measured from 0 to 14, to an accuracy of +/-0.01pH and a resolution of 0.01pH.
The meter is capable of five point pH calibration to ensure accuracy.
It also automatically recognises and calibrates to standard buffer values, making pH calibration faster and easier.
• Palintest: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
