Product category:
Gas handling
News Release from: Peak Scientific Instruments | Subject: NitroGen N110DR
Edited by the Laboratorytalk Editorial
Team on 05 January 2007
The most reliable laboratory nitrogen
supply
After what it calls the huge success of its dual redundancy products, Peak Scientific has extended this range with the NitroGen N110DR continuous nitrogen supply
The NitroGen N110DR has been specifically designed as a continuous nitrogen supply, offering a maximum flow rate of 30l/min of nitrogen at up to 100psi The N110DR has been tried, tested and approved by major instruments manufacturers to ensure compliance with their LC/MS/MS
This article was originally published on Laboratorytalk on 13 Feb 2002 at 8.00am (UK)
Related stories
Cylinder free hydrogen
Ion exchange membrane gas generator system provides a continuous supply of hydrogen that is said to be safer and easier to maintain than using cylinders
The dual redundancy compressor systems featured in the N110DR ensure 100% LC/MS uptime even in the unlikely event of a compressor failure.
Further benefits include an intelligent PLC to allow integrated self-diagnostics which will alert the user if a fault or leak has been detected or service is required.
The N110DR is further able to detect the mode in which the LC/MS is operated and automatically adjust the nitrogen supply as required.
With a small foot print and very quiet in operation, the NitroGen N110DR can easily be placed in the laboratory while offering the most reliable and convenient solution to nitrogen requirements, says Peak Scientific Instruments. Request a free brochure from Peak Scientific Instruments ...
• Peak Scientific Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
