Product category:
Detectors, sensors and probes
News Release from: ProMinent Fluid Controls (UK) | Subject: BRE1
Edited by the Laboratorytalk Editorial
Team on 29 January 2002
Bromine disinfection probe and
controller
Water treatment specialist ProMinent Fluid Controls has introduced a new bromine measurement probe, BRE1, which measures both free and bound bromine
The BRE1 bromine measurement probe from ProMinent Fluid Controls can be used in conjunction with a Dulcometer D1C bromine measurement control unit and an in line probe housing to provide a complete system for bromine disinfection control in a wide variety of water treatment applications Bromine is an effective alternative to chlorine disinfection in a number of applications, ranging from industrial rinsing baths and cooling towers through to swimming pool and hot spa pool water
This article was originally published on Laboratorytalk on 19 Jul 2000 at 8.00am (UK)
Related stories
Extension of metering pump capacity to 1000 l/hr
The Sigma range of motor driven metering pumps from ProMinent Fluid Controls has been upgraded with the introduction of the Sigma/3.
Bromine works reliably even at high pH values, and is a more effective algicide than chlorine.
In addition it does not impart the characteristic odour associated with chlorine-based disinfection.
The BRE1 measures total bromine, since both free and bound bromine contribute to the disinfection process.
The BRE1 has a measurement range of 0.2 - 10mg/l at a water temperature of 5-45C and at pH values between 6.5 and 9.5.
• ProMinent Fluid Controls (UK): contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
