Product category:
Manual Valves
News Release from: Parker Instrumentation | Subject: IntraFlow
Edited by the Laboratorytalk Editorial
Team on 19 November 2003
Modular substrate for better process
sampling
Flow control substrate provides platform to achieve Nessi goals in petrochem/chemical analytical, laboratory, and general instrumentation flow control applications
Parker Instrumentation has launched a modular substrate delivering what it describes as a 'leap forward' for process analytical and laboratory instrumentation flow control systems The new surface-mounting fittings advance performance on all major fronts: dramatically reducing the amount of space required, minimising the volume of sample flow paths, and speeding construction and reducing cost of ownership
This article was originally published on Laboratorytalk on 10 Jan 2007 at 8.00am (UK)
Related stories
Website answers instrumentation saving question
Parker Instrumentation has launched a website dedicated to its groundbreaking permanent tube connection technology for higher pressure applications, Phastite
Literature details radical new fluid connector
Parker Instrumentation has published a 24-page guide to an innovative new design of ferrule-less fluid connector, which provides permanent connections for instrumentation systems operating to 1379 bar
Parker's new IntraFlow substrate fitting was developed to meet the analytical industry standards set by Nessi: the influential New Sample/Sensor Initiative, which originated at the Center for Process Analytical Chemistry (Cpac) at the University of Washington.
Nessi's roadmap has three generations - IntraFlow satisfies the generation 1 mechanical requirements and is a versatile foundation for the planned generations 2 and 3.
Designed to meet the rigorous demands of sampling systems, IntraFlow surface-mount substrate fittings are ISA/ANSI SP76.00.02 compliant, and plug together in seconds using novel slip-fit connectors.
Further reading
Push-fit tube fitting offers huge cost savings
Parker Instrumentation announces a radical new design of tube fitting that can deliver huge cost savings to builders of industrial equipment involving fluids
Pipe fittings support high pressure instruments
Range provides instrumentation and piping engineers with quality components for interconnecting instrument-grade piping in the growing number of high pressure applications
Flow instrument mounting practice is challenged
Parker Instrumentation has launched a website that is dedicated to introducing a radical new technology for interfacing differential pressure transmitters to process piping
No welding is required to build a system.
The 1.5 inch (38.1mm) footprint modules simply screw onto a pegboard backplane that provides the connection force and rigidity for the finished flow control assembly, and may be disassembled rapidly for maintenance or re-use.
Finished systems occupy typically around 25% of the space of a conventionally plumbed flow control system.
A major technical advantage of Parker's new modular substrate is its intrinsic support for three-way flow paths.
Unlike the linear substrates in common use for semiconductor 'gas stick' delivery systems, IntraFlow maintains flow paths on a single plane - regardless of direction.
No manifolds on additional substrate layers are needed to implement the more sophisticated functionality required by sample systems.
This approach allows flow control substrates to be constructed with extremely low profiles (less than 3/4 inch/20mm including the pegboard), and additionally optimises efficiency in terms of smaller internal volume sizes for faster sampling and purging cycles.
Another important benefit of the design is its ability to apply heat right at the substrate, for rapid and precise sample conditioning.
Standard electric heater cartridges may be inserted in a backplane to apply heat via conduction, at within 5/32 inch of the sample flow path.
Pegboards suitable for steam heating are available if preferred.
System assembly and disassembly is entirely mechanical.
The slip-fit connectors that link the modules are simply inserted by hand.
Screwing the module assembly down onto the pegboard then requires just a 5/32 inch Allen key.
All components are reconfigurable and reusable, a feature that supports the development of Nessi generation 2 and 3 components and technologies.
"The idea was born out of what has been said about process analysis for years - the analyser is only as good as the sample delivery system," says Graham Johnson, Parker Instrumentation's business development manager.
"The idea has been to miniaturise and modularise in an effort to reduce the cost of ownership." IntraFlow systems may be designed using a free Parker software tool that will be made available on the web.
Users can define the flow path, which then creates a bill of materials (BOM), assembly drawings and process and instruction drawings.
When the configuration is complete, users can order the assembled system from Parker, or build it themselves.
"This is a true paradigm shift for sampling systems," adds Johnson.
"A major benefit is that sampling systems can now be built on-site.
"After configuring the flow control path using the software tool, a small stock of modular substrate fittings allows users to plug a system together in an hour or so." The new modular substrate is supported by a wide range of compatible flow control components and accessories such as filters, flow meters, pressure regulators, quick couplers, and a comprehensive range of valve types including ball, diaphragm, metering, needle, toggle, check and relief.
• Parker Instrumentation: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
