Product category:
Mechanical testing equipment
News Release from: RDP Electronics | Subject: DWT
Edited by the Laboratorytalk Editorial
Team on 27 January 2003
Measure round corners with displacement
transducer
Transducer body is simply bolted to the point of reference and the draw wire extended and attached to the moving part of the system
Accurately measuring the displacement from a fixed point couldn't be easier than with the DWT transducer from RDP Electronics Based on the draw-wire principle, the DWT transducer body is simply bolted to the point of reference and the draw wire extended and attached to the moving part of the system
Measurements can be made point-to-point or round corners.
The plastic-coated draw wire can measure displacements from a maximum of 600mm up to 3.5m with a high degree of accuracy, and special versions are available for measurement ranges up to 100mm or 7.5m.
DWT is available in two housing designs; standard for general internal use and a sealed housing offering a greater degree of environmental protection.
The transducers also offer a variety of outputs including 4-20mA, 0-10Vdc.
An LCD display is available as an option. Request a free brochure from RDP Electronics ...
• RDP Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
