Short stroke position transducers for wet jobs
A
RDP Electronics product story
Edited by the Laboratorytalk editorial team
Dec 19, 2006
When accurate measurement or control is needed in wet locations such as pulp and paper plants or in the water industry, the DCW range of short-stroke LVDT position transducers will fit the bill
These LVDTs, complete with integral signal conditioning electronics, are fully tested for totally submersed operations such as cable laying too.
With displacement ranges from +/-2.5mm to +/-10mm and the capability of operating at pressures of up to 10bar, the DCW series offers all the features and convenience expected of a DC to DC LVDT transducer including high cycle life, high resolution and high accuracy.
Contained in a welded stainless steel construction they are available in unguided, captive or spring return versions and with the option of 4-20mA output on some models allowing long cables to be tolerated without performance loss.
Long stroke versions up to a maximum of +/-150mm and 207bar are also included in a comprehensive range of submersible LVDT models.
Not what you're looking for? Search the site.
Contact RDP Electronics
Tel +44 1902 457512
Request information
Other RDP Electronics stories
-
RDP enhances MTS Temposonics position sensors
RDP Electronics has announced that its non-contact MTS Temposonics position sensors can measure up to 30 positions along a common axis using a single sensor. -
Economic solution for torque measurement
The model 1700 series of Lebow rotary torque transducers available from RDP Electronics offer an economical device for angle or speed measurement in research or industrial applications. -
Load cell offsets side effects of side loading
Enclosed in a stainless steel casing the Model 31 range utilises rugged strain gauge technology that measures tension or compression forces applied to the centre threads of the load cell. -
Differential transducer suits gas or fluid
The HLZ transducer measures the difference in pressure between two wetted ports and is offered with linearity options of 0.25% and 0.50% full scale for pressures ranges from 50psid to 7500psid -
Sub miniature gas and fluid pressure sensors
At just 18mm in length and only 7.9mm diameter the Model S sub miniature pressure sensor is ideally suited for gas or fluid measurement and control in situations where a small device is essential
Categories
- Analytical instruments (7,904)
- Life sciences and clinical laboratory equipment (3,194)
- Computer hardware (787)
- Industry news (16)
- Laboratory equipment and wares (5,360)
- Laboratory supplies and consumables (1,136)
- Pumps, Valves, Filters (681)
- Services (2,689)
- Computer software (2,705)
