Product category:
Temperature, pressure and flow measurement
News Release from: SensorsOne | Subject: Ashdown Control DRS
Edited by the Laboratorytalk Editorial
Team on 12 June 2006
How low can you go, in the wet?
SensorsOne is adding the Ashdown Control DRS low differential pressure transducer and transmitter for use with wet and dirty gases to its pressure sensor range
Ashdown Control specialise in low pressure measurement and manufacture low gauge, absolute and differential referenced pressure sensors with 4-20mA current output signal and 0-5 or 0-10V amplified voltage output signals The Ashdown Control DRS has been developed for industrial, HVAC, laboratory, automotive test and process applications
This article was originally published on Laboratorytalk on 23 May 2006 at 8.00am (UK)
Related stories
Calibrating pressure transmitters just got easier
SensorsOne is launching the new digital autozero and span option for the Gefran TK industrial pressure transmitter and the TPSA precision pressure transmitter
The sensing technology is made from all stainless steel and is suitable for use with condensing dirty gases with the silicone oil filled option.
The pressure ranges that can be specified start from a very low pressure of 1.6mbar or 160Pa which can be turned down to an even lower 0.4mbar or 40Pa pressure range and go up to a 6bar differential pressure range.
All ranges are accurate to +/-0.35% of maximum span including linearity, hysteresis, and repeatability.
The Smart electronics can easily be configured to setup a turndown range of up to 5 to 1 for positive ranges or 7.5 to 1 for -50 to +100% ranges, compound range, zero elevation and suppression.
The smart electronics can also be setup at the factory for square root output for flow measurement, customer specified non-linear output, filter jump out and RC time constant adjustment.
• SensorsOne: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page

