Product category:
Mechanical testing equipment
News Release from: Sensor Technology | Subject: Torqsense
Edited by the Laboratorytalk Editorial
Team on 14 January 2002
Non contact rotary torque transducers
Sensor Technology has introduced its new range of Torqsense RWT rotary torque transducers, exploiting the little-know 'surface acoustic wave' phenomenon
With full-scale ranges between 100mNm and 10,000Nm, the E300 RWT1 series of transducers utilises the little known surface acoustic wave (SAW) phenomenon This SAW approach has allowed the development of small transducers, which are not only exceptionally accurate, but more importantly, require no physical contact between the revolving shaft and its housing
This article was originally published on Laboratorytalk on 6 Mar 2007 at 8.00am (UK)
Related stories
World's best vacuum seals tested but not touched
A non-contact torque monitoring system that could guarantee an infinite lightness of touch has proven to be the only way to test the seals of super high performance vacuum systems
Mini-mixer will be the torque of many industries
A torque sensor is helping analyse recipe mixing properties in a project that could slash development costs in the food and plastics industry and help nanotechnology advances in pharmaceuticals
In a Torqsense transducer, the surface waves are produced by passing an alternating voltage across the terminals of two interleaved comb-shaped arrays that are laid onto one end of piezoelectric substrate.
A similar receiving array, at the other end of the substrate, converts the wave back in to an electric signal.
The frequency of the wave generated is dependant on the spacing of the teeth in the comb array and as the direction of the wave propagation is at right angles to the teeth, any change in its length alters the spacing of the teeth and the operating frequency.
To measure torque in a shaft, two SAW sensors are bonded rigidly to a shaft at 45deg to the axis and connected in a 'half bridge' configuration, so that when the shaft is subjected to a torque, outputs are combined to produce a difference signal proportional to applied torque.
This signal is exchanged via a capacitive rotor and stator.
Torqsense transducers require minimum length of shaft, have low inertia, no physical contact between shaft and housing, wide bandwidth, high resolution and accuracy, and excellent noise immunity.
The technology lends itself to design of OEM transducers for specific customer applications.
The transducers are available with RPM output and IP65 sealing as options, and interface with the E302 advanced torque transducer display, which features full temperature correction for changes in the modulus of elasticity of the shaft.
The E302 can be interfaced with Torqview virtual instrumentation display PC software to give a self contained data display and recording system.
Applications include automotive, aerospace, viscosity and consistency measurement, motor and machinery control and condition monitoring, and torque control of tightening procedures. Request a free brochure from Sensor Technology ...
• Sensor Technology: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
