Product category:
Gas analysis equipment
News Release from: Systech Instruments | Subject: Series 500
Edited by the Laboratorytalk Editorial
Team on 15 August 2002
Process gas moisture analyser is
versatile
Combining microprocessor control with a high quality phosphorus pentoxide electrolytic sensor to provide accurate and dependable measurement of absolute moisture content
The new series 500 moisture analysers from Systech Instruments combine microprocessor control with a high quality phosphorus pentoxide electrolytic sensor to provide accurate and dependable measurement of absolute moisture content of all types of non-corrosive process gases in ppm(v) or dew point, C or F With autoranging from 0.01 to 1000ppm, remote sensors, fault alarms, an auto calibration option and RS232/485 data interface, the series 500 is versatile and simple to install and operate
This article was originally published on Laboratorytalk on 31 Jul 2002 at 8.00am (UK)
Related stories
Fast and accurate film permeation analysis
Molecules of oxygen, diffusing through the film, are carried by nitrogen to a precision sensor that directly measures oxygen content for display without complex extrapolation
Fast and accurate on-line zirconia oxygen analyser
Versatile instrument provides response to changes in the oxygen content of a process gas with a response time of 90% of step change within five seconds and accuracy better than 1%
Sensors can be mounted inside the analyser case or remotely and a wide range of types is available to meet the needs of most applications.
The general purpose phosphorus pentoxide sensor for remote installation, supplied with flow valves and wall mounting bracket, can be mounted up to 100m from the analyser and connected using a simple coaxial cable.
A thermal mass flow controller can be fitted to the internal sensor model to automatically maintain the correct flow rate for maximum accuracy.
This option also provides flow alarms to ensure that the instrument and flow system are always in the correct configuration.
For complete security, an autocalibrate check option allows the analyser to be connected to a supply of certified gas and programmed to check calibration automatically at regular intervals.
If the calibration moves outside preset limits, a warning is displayed and a fault alarm sounded.
Three versions of the model 500 are available; panel or bench mount, Nema 4X/IP66 water and weatherproof, and 19 inch rack mount.
The 19 inch rack version can be combined with a Systech oxygen analyser in a standard 19 inch cabinet to create a dual gas unit.
• Systech Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
