Product category:
Glass/plasticware
News Release from: Toolcraft Plastics (Swindon)
Edited by the Laboratorytalk Editorial
Team on 20 March 2003
Dealing with biodegradable plastics
Not only biodegradable, but compostable polymers could find widespread applications as diverse as medical disposables and golf tees
The biodegradable properties of polyvinyl alcohol (PVOH) particularly as it comes into contact with water, have been known for a number of years Commercially viable volumes of compostable polymer material based on it however, have only recently become available in a workable dry pellet form and of consistent quality
This article was originally published on Laboratorytalk on 6 Sep 2002 at 8.00am (UK)
Related stories
Tooling-up with bedside manner
Hospital patients' medical alarm and environmental/comfort control panel project demanded precision tooling in aluminium alloy
Antistatic trays for labs and clean rooms
Manufacturer of customised trays works in antistatic materials to produce standard vacuum formed A4 paper trays, and will make larger items
The 'rediscovery' as a thermoplastic has high potential for the production of environmentally acceptable disposable parts.
Toolcraft Plastics of Swindon, in conjunction with material developer Pvaxx, has been trialing both biodegradable and bio-compostable materials, to establish the mould conditions for high product quality and cost economy.
By definition, the biodegradable material will ultimately break down into carbon dioxide, water, and biomass within a specific time.
Further reading
New brand in 2D barcodes for biotech
BioMeridian aims to bring the advantages of quality control and better traceability to more laboratories by selling direct to end-users or via specialist distributors at a competitive price
Medica preview: Adam Equipment
Medica 2002 in Dusseldorf, 20-23 November 2002, is the place to see Adam Equipment's Mediscales range of simple to use digital scales
Automated synthesiser at German Peptide Symposium
Advanced ChemTech Europe has announced its presence at the German Peptide Symposium in Berlin, Germany (23-26th March 2003) with its latest range of products to support productive peptide chemistry.
As compostable material it must also contain no toxic materials, the breakdown time must be less than 12 weeks, and the resulting compost must not impede plant growth.
Toolcraft has wide experience with moulding engineering plastics including some of the lesser used materials and unusual fillers, and the results of tests on the four injection moulding grades of biodegradable materials tried have been startling.
With the high standards of production quality control, Toolcraft was able to run them on existing production lines and equipment, achieving mould times as low as 50% of runs with standard materials, while retaining a high quality of finished product.
These polymer materials have been shown to be similar to conventional polymers in both thermal characteristics and many mechanical parameters, including flexural modulus, tensile and impact strength.
Other product qualities include optimum viscosity and melt flow, the absence of static build up, non-toxic safe-to-handle qualities, and first rate print adhesion and weldability.
The net result of trials at Toolcraft is substantially lower parts cost with all the advantages of the familiar engineering plastics.
The crucial property of the material, however, is its unique capacity to biodegrade and compost into non-toxic residues.
The injection moulding materials trailed by Toolcraft degrade when coming into contact with water, the rate of degradation being temperature dependant, that is, faster degradation in hot water.
This property gives the materials the ability to provide a major contribution to the fundamental ecological issue in the disposal of plastics with a significant impact on the problems posed by materials with an indefinite lifespan.
These biodegradable and compostable polymers have received European safety approval for food contact, further extending their value.
All materials trailed to date accept a full range of colours.
Most importantly the degradation period, which can be adjusted by grade choice and coatings, commences only when the part comes into contact with moisture.
Other moulded applications currently being evaluated include golf tees, garment hangers and medical disposables.
Some materials include mouldable sheet which could enhance Toolcraft's range of industrial storage trays.
While most materials tested worked well in conventional tools, Toolcraft's experience in the design and running of mould tools and a tool room in-house proved invaluable throughout the trials.
Toolcraft is now able to work most biodegradable materials with confidence.
• Toolcraft Plastics (Swindon): contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
